ADV7127KRUZ140 Analog Devices Inc, ADV7127KRUZ140 Datasheet - Page 15

• Manufacturer Part Number: ADV7127KRUZ140
• Description: IC DAC VID 140MHZ 3.3/5V 24TSSOP
• Manufacturer: Analog Devices Inc

Specifications of ADV7127KRUZ140

• Data Interface: Parallel
• Settling Time: 15ns
• Number Of Bits: 10
• Number Of Converters: 1
• Voltage Supply Source: Single Supply
• Power Dissipation (max): 30mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP
• Resolution (bits): 10bit
• Sampling Rate: 240MSPS
• Input Channel Type: Parallel
• Supply Current: 33mA
• Digital Ic Case Style: TSSOP
• No. Of Pins: 24
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Digital Signal Interconnect
The digital signal lines to the ADV7127 should be isolated as
much as possible from the analog outputs and other analog
circuitry. Digital signal lines should not overlay the analog
power plane.
Due to the high clock rates used, long clock lines to the ADV7127
should be avoided so as to minimize noise pickup.
Any active pull-up termination resistors for the digital inputs
should be connected to the regular PCB power plane (V
not the analog power plane.
Analog Signal Interconnect
The ADV7127 should be located as close as possible to the
output connectors thus minimizing noise pickup and reflections
due to impedance mismatch.
REV. 0
CC
), and
–15–
The video output signals should overlay the ground plane, and
not the analog power plane, thereby maximizing the high fre-
quency power supply rejection.
For optimum performance, the analog outputs should each
have a source termination resistance to ground of 75
terminated 75
should be as close as possible to the ADV7127 so as to mini-
mize reflections.
Additional information on PCB design is available in an applica-
tion note entitled “Design and Layout of a Video Graphics
System for Reduced EMI.” This application note is available
from Analog Devices, publication number E1309-15-10/89.
configuration). This termination resistance
ADV7127
(doubly