GWIXP465BAB Intel, GWIXP465BAB Datasheet - Page 66

• Manufacturer Part Number: GWIXP465BAB
• Manufacturer: Intel

Specifications of GWIXP465BAB

• Core Operating Frequency: 266MHz
• Operating Supply Voltage (typ): 1.3/1.5/2.5/3.3V
• Operating Supply Voltage (max): 1.575/2.7/3.465V
• Operating Supply Voltage (min): 1.235/2.3/3.135V
• Package Type: BGA
• Pin Count: 544
• Mounting: Surface Mount
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Not Compliant

Package Information
Table 15.
May 2005
66
UTP_IP_DATA[6] /
ETHA_CRS
UTP_IP_DATA[7] /
SMII_RXDATA[4]
NOTE: This table discusses all features supported on the Intel
† For a legend of the Type codes, see
†† For information on selecting the desired interface, see the Intel
Name
see
Table 1 on page
UTOPIA Level 2/MII_A/ SMII[4] Interface (Sheet 8 of 9)
Power
Reset
on
Z
Z
14.
†
Reset
VI
VI
Table 10 on page
†
Software
Enables
Normal
Reset
After
Until
VI
VI
46.
Software
Enables
Normal
After
®
VI
VI
IXP45X and Intel
®
IXP45X and Intel
Type
I
I
†
UTOPIA Mode of Operation:
UTOPIA input data. Also known as RX_DATA.
Used by to the processor to receive data from an ATM UTOPIA Level 2-compliant PHY.
MII Mode of Operation:
Asserted by the PHY when the transmit medium or receive medium are active. De-asserted when
both the transmit and receive medium are idle. Remains asserted throughout the duration of
collision condition. PHY asserts CRS asynchronously and de-asserts synchronously with respect
to ETHA_RXCLK.
SMII mode of operation:
Not used.
When this interface/signal is enabled and is not being used in a system design, the interface/
signal should be pulled high with a 10-KΩ resistor. When this interface is disabled via the UTOPIA
and/or the NPE-A Ethernet soft fuse (refer to Expansion Bus Controller chapter of the Intel
IXP45X and Intel
being used in a system design, this interface/signal is not required for any connection.
UTOPIA Mode of Operation:
UTOPIA input data. Also known as RX_DATA.
Used by to the processor to receive data from an ATM UTOPIA Level 2-compliant PHY.
MII Mode of Operation:
Not Used.
SMII mode of operation:
Input data for SMII interface number four. The data on this signal is received synchronously with
respect to the rising edge of SMII_CLK when operating as an SMII interface and synchronously
with respect to the rising edge of SMII_RXCLK when operating as a Source Synchronous SMII
interface.
When this interface/signal is enabled and is not being used in a system design, the interface/
signal should be pulled high with a 10-KΩ resistor. When this interface is disabled via the UTOPIA
and/or the NPE-A Ethernet soft fuse (refer to Expansion Bus Controller chapter of the Intel
IXP45X and Intel
being used in a system design, this interface/signal is not required for any connection.
®
IXP46X Product Line of Network Processors. For details on feature support listed by processor,
®
IXP46X Product Line of Network Processors Developer’s Manual.
®
®
Intel
IXP46X Product Line of Network Processors Developer’s Manual) and is not
IXP46X Product Line of Network Processors Developer’s Manual) and is not
®
IXP45X and Intel
®
Description
IXP46X Product Line of Network Processors Datasheet
Document Number:
306261-002
®
®