EPM7128SQC160-15N Altera, EPM7128SQC160-15N Datasheet - Page 9

• Manufacturer Part Number: EPM7128SQC160-15N
• Description: IC MAX 7000 CPLD 128 160-PQFP
• Manufacturer: Altera
• Series: MAX® 7000r

Specifications of EPM7128SQC160-15N

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 15.0ns
• Voltage Supply - Internal: 4.75 V ~ 5.25 V
• Number Of Logic Elements/blocks: 8
• Number Of Macrocells: 128
• Number Of Gates: 2500
• Number Of I /o: 100
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 160-MQFP, 160-PQFP
• Voltage: 5V
• Memory Type: EEPROM
• Number Of Logic Elements/cells: 8
• Cpld Type: EEPROM
• No. Of Macrocells: 128
• No. Of I/o's: 100
• Propagation Delay: 15ns
• Global Clock Setup Time: 11ns
• Frequency: 76.9MHz
• Supply Voltage Range: 4.75V To 5.25V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: 544-2043; EPM7128SQC160-15N

Figure 3. EPM7032, EPM7064 & EPM7096 Device Macrocell
Altera Corporation
36 Signals
from PIA
Logic Array
Product Ter
16 Expander
T T ms
Each LAB is fed by the following signals:
■
■
■
Macrocells
The MAX 7000 macrocell can be individually configured for either
sequential or combinatorial logic operation. The macrocell consists
of three functional blocks: the logic array, the product-term select
matrix, and the programmable register. The macrocell of EPM7032,
EPM7064, and EPM7096 devices is shown in
Product-
Select
Matrix
Ter
T T m
36 signals from the PIA that are used for general logic inputs
Global controls that are used for secondary register functions
Direct input paths from I/O pins to the registers that are used
for fast setup times for MAX 7000E and MAX 7000S devices
Shared Logic
Expanders
Parallel Logic
Expanders
(from other
macrocells)
MAX 7000 Programmable Logic Device Family Data Sheet
Global
Clear
Select
Clear
Global
Clocks
2
VCC
Enable
Clock/
Select
Fast Input
Select
D/T
ENA
Figure
CLRN
PRN
to PIA
Q
Programmable
Register
Register
3.
Bypass
From
I/O pin
To I/O
Control
Block
9