RH50 40K 1% Vishay, RH50 40K 1% Datasheet - Page 3
![Wirewound Resistors 50watts 40Kohms 1%](/photos/16/50/165070/rhnh_sml.jpg)
RH50 40K 1%
Manufacturer Part Number
RH50 40K 1%
Description
Wirewound Resistors 50watts 40Kohms 1%
Manufacturer
Vishay
Datasheet
1.RH050470R0FE02.pdf
(5 pages)
Specifications of RH50 40K 1%
Resistance
40 KOhms
Tolerance
1 %
Power Rating
50 Watts
Temperature Coefficient
+/- 20 PPM / C
Operating Temperature Range
- 55 C to + 250 C
Dimensions
16 mm Dia. x 28.96 mm W x 49.99 mm L x 15.49 mm H
Product
Power Resistors Wire Wound Aluminum Housed
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
www.vishay.com
168
RH, NH
Vishay Dale
POWER RATING
Vishay RH resistor wattage ratings are based on mounting to the following heat sink:
AMBIENT TEMPERATURE DERATING
Derating is required for ambient temperatures above 25 °C, see the following graph.
Curves A, B, C apply to operation of unmounted resistors. Curve D applies to all types when mounted to specified heat sink.
A = RH-5 and RH-10 size resistor, unmounted
B = RH-25 size resistor, unmounted
C = RH-50, RH-100 and RH-250 size resistor, unmounted
D = All types mounted to recommended aluminum heat sink
REDUCED HEAT SINK DERATING:
Derating is also required when recommended heat sink
area is reduced.
A = RH-5 and RH-10 size resistor
B = RH-25 size resistor
C = RH-50, RH-100 and RH-250 size resistor
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Dielectric Withstanding Voltage
Short Time Overload
Maximum Working Voltage
Insulation Resistance
Terminal Strength
Solderability
Operating Temperature Range
RH-5 and RH-10:
RH-25:
RH-50:
RH-100 and RH-250:
Derating
Wirewound Resistors, Military, MIL-PRF-18546 Qualified,
4" × 6" × 2" × 0.040" thick aluminum chassis (129 sq. in. surface area)
5" × 7" × 2" × 0.040" thick aluminum chassis (167 sq. in. surface area)
12" × 12" × 0.059" thick aluminum panel (291 sq. in. surface area)
12" × 12" × 0.125" thick aluminum panel (294 sq. in. surface area)
100
120
80
60
40
20
0
- 55 - 50
Type RE, Aluminum Housed, Chassis Mount
For technical questions, contact: ww2bresistors@vishay.com
C
A
B
ppm/°C
UNIT
0
V
°C
lb
V
Ω
AC
-
-
25
1000 for RH/5, RH-10 and RH/25, 2000 for RH/50, 4500 for RH/100 and RH/250
50
± 100 for 0.1 Ω to 0.99 Ω, ± 50 for 1 Ω to 9.9 Ω, ± 20 for 10 Ω and above
10 000 MΩ minimum dry, 1000 MΩ minimum after moisture test
MIL-PRF-18546 Type - Meets requirements of ANSI J-STD-002
5 minimum for RH-5 and RH-10, 10 minimum for all others
Heat Sink Derating
100
90
80
70
60
50
40
30
20
10
0
RH RESISTOR CHARACTERISTICS
0
D
5 × rated power for 5 seconds
AMBIENT TEMPERATURE IN
150
A
B
C
20
- 55/+ 250
(P x R)
1/2
40
% OF RECOMMENDED HEAT SINK AREA
250
°
C
Document Number: 30201
60
Revision: 11-Jul-07
80
100