EP2S90F1020I4N Altera, EP2S90F1020I4N Datasheet - Page 104

• Manufacturer Part Number: EP2S90F1020I4N
• Description: IC STRATIX II FPGA 90K 1020-FBGA
• Manufacturer: Altera
• Series: Stratix® IIr

Specifications of EP2S90F1020I4N

• Number Of Logic Elements/cells: 90960
• Number Of Labs/clbs: 4548
• Total Ram Bits: 4520488
• Number Of I /o: 758
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1020-FBGA
• Family Name: Stratix II
• Number Of Logic Blocks/elements: 90960
• # I/os (max): 758
• Frequency (max): 711.24MHz
• Process Technology: 90nm (CMOS)
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 90960
• Ram Bits: 4520488
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1920; EP2S90F1020I4N

High-Speed Differential I/O with DPA Support
High-Speed
Differential I/O
with DPA
Support
2–96
Stratix II Device Handbook, Volume 1
Notes to
(1)
(2)
(3)
(4)
(5)
(6)
Non-Stratix II VCC = 3.3 V
Table 2–20. Supported TDO/TDI Voltage Combinations (Part 2 of 2)
Device
The TDO output buffer meets V
The TDO output buffer meets V
An external 250-Ω pull-up resistor is not required, but recommended if signal levels on the board are not optimal.
Input buffer must be 3.3-V tolerant.
Input buffer must be 2.5-V tolerant.
Input buffer must be 1.8-V tolerant.
Table
2–20:
VCC = 2.5 V
VCC = 1.8 V
VCC = 1.5 V
Buffer Power
TDI Input
Stratix II devices contain dedicated circuitry for supporting differential
standards at speeds up to 1 Gbps. The LVDS and HyperTransport
differential I/O standards are supported in the Stratix II device. In
addition, the LVPECL I/O standard is supported on input and output
clock pins on the top and bottom I/O banks.
The high-speed differential I/O circuitry supports the following high
speed I/O interconnect standards and applications:
■
■
■
■
There are four dedicated high-speed PLLs in the EP2S15 to EP2S30
devices and eight dedicated high-speed PLLs in the EP2S60 to EP2S180
devices to multiply reference clocks and drive high-speed differential
SERDES channels.
Tables 2–21
can clock in each of the Stratix II devices. In
first row for each transmitter or receiver provides the number of channels
driven directly by the PLL. The second row below it shows the maximum
channels a PLL can drive if cross bank channels are used from the
adjacent center PLL. For example, in the 484-pin FineLine BGA EP2S15
V
C C I O
v
v
v
OH
OH
SPI-4 Phase 2 (POS-PHY Level 4)
SFI-4
Parallel RapidIO
HyperTransport technology
v
(1),
(1),
(1),
(MIN) = 2.4 V.
(MIN) = 2.0 V.
= 3.3 V V
(1)
(4)
(4)
(4)
through
Stratix II TDO V
C C I O
v
v
v
v
2–26
(2),
(2),
= 2.5 V V
(2)
(2)
(5)
(5)
show the number of channels that each fast PLL
C C I O
C C I O
Voltage Level in I/O Bank 4
v
v
v
v
= 1.8 V V
(3)
(3)
(6)
Tables 2–21
Level shifter
Level shifter
Level shifter
C C I O
required
required
required
v
= 1.5 V V
Altera Corporation
through
Level shifter
Level shifter
Level shifter
C C I O
required
required
required
May 2007
2–26
v
= 1.2 V
the