W681310WG Nuvoton Technology Corporation of America, W681310WG Datasheet - Page 11

• Manufacturer Part Number: W681310WG
• Description: IC VOICEBND CODEC 3V 1CH 20TSSOP
• Manufacturer: Nuvoton Technology Corporation of America
• Type: PCMr

Specifications of W681310WG

• Data Interface: PCM Audio Interface
• Resolution (bits): 8 b
• Number Of Adcs / Dacs: 1 / 1
• Sigma Delta: No
• Voltage - Supply, Analog: 2.7 V ~ 5.25 V
• Voltage - Supply, Digital: 2.7 V ~ 5.25 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP
• Single Supply Voltage (typ): 3.3/5V
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (max): 5.25V
• Package Type: TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: W681360DK - KIT DEVELOPMENT FOR W681360
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant

The Long Frame Sync or Short Frame Sync interface mode can be selected by connecting the BCLKR
or BCLKT pin to a 64 kHz to 4.800 MHz clock and connecting the FSR or FST pin to the 8 kHz frame
sync. The device synchronizes the data word for the PCM interface and the CODEC sample rate on the
positive edge of the Frame Sync signal. It recognizes a Long Frame Sync when the FST pin is held
HIGH for two consecutive falling edges of the bit-clock at the BCLKT pin. The length of the Frame Sync
pulse can vary from frame to frame, as long as the positive frame sync edge occurs every 125 μsec.
During data transmission in the Long Frame Sync mode, the transmit data pin PCMT will become low
impedance when the Frame Sync signal FST is HIGH or when the 8 bit data word is being transmitted.
The transmit data pin PCMT will become high impedance when the Frame Sync signal FST becomes
LOW while the data is transmitted or when half of the LSB is transmitted. The internal decision logic will
determine whether the next frame sync is a long or a short frame sync, based on the previous frame
sync pulse. To avoid bus collisions, the PCMT pin will be high impedance for two frame sync cycles
after every power down state. More detailed timing information can be found in the interface timing
section.
The W681310 operates in the Short Frame Sync Mode when the Frame Sync signal at pin FST is HIGH
for one and only one falling edge of the bit-clock at the BCLKT pin. On the following rising edge of the
bit-clock, the W681310 starts clocking out the data on the PCMT pin, which will also change from high
to low impedance state. The data transmit pin PCMT will go back to the high impedance state halfway
the LSB. The Short Frame Sync operation of the W681310 is based on an 8-bit data word. When
receiving data on the PCMR pin, the data is clocked in on the first falling edge after the falling edge that
coincides with the Frame Sync signal. The internal decision logic will determine whether the next frame
sync is a long or a short frame sync, based on the previous frame sync pulse. To avoid bus collisions,
the PCMT pin will be high impedance for two frame sync cycles after every power down state. More
detailed timing information can be found in the interface timing section.
The GCI interface mode is selected when the BCLKR pin is connected to V
sync cycles. It can be used as a 2B+D timing interface in an ISDN application. The GCI interface
consists of 4 pins : FSC (FST), DCL (BCLKT), Dout (PCMT) & Din (PCMR). The FSR pin selects
channel B1 or B2 for transmit and receive. Data transitions occur on the positive edges of the data clock
DCL. The Frame Sync positive edge is aligned with the positive edge of the data clock DCLK. The data
rate is running half the speed of the bit-clock. The channels B1 and B2 are transmitted consecutively.
Therefore, channel B1 is transmitted on the first 16 clock cycles of DCL and B2 is transmitted on the
second 16 clock cycles of DCL. For more timing information, see the timing section. The GCI interface
supports bit clocks of 512 kHz to 6176 kHz for data rates of 256 kHz to 3088 kHz.
7.4.1. Long Frame Sync
7.4.2. Short Frame Sync
7.4.3. General Circuit Interface (GCI)
- 11 -
Publication Release Date: April 2007
SS
for two or more frame
W681310
Revision B14