ISP1362BDFA ST-Ericsson Inc, ISP1362BDFA Datasheet - Page 16

• Manufacturer Part Number: ISP1362BDFA
• Description: IC USB OTG CONTROLLER 64-LQFP
• Manufacturer: ST-Ericsson Inc

Specifications of ISP1362BDFA

• Controller Type: USB 2.0 Controller
• Interface: Parallel/Serial
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Other names: 568-1219; ISP1362BD,151; ISP1362BD-S

NXP Semiconductors
ISP1362_5
Product data sheet
The INTL and ATL buffers use ‘blocked memory management’ scheme to enhance the
status and control capability of each and every individual Philips Transfer Descriptor
(PTD) structure. The INTL and ATL buffers are further divided into blocks of equal sizes,
depending on the value written to the HcATLBlkSize register (ATL) and the HcINTLBlkSize
register (INTL). The ISP1362 Host Controller supports up to 32 blocks in the ATL and
INTL buffers. Each of these blocks can be used for one complete PTD data.
Note that the block size does not include the 8 bytes PTD header and is strictly the size of
the payload. Both the ATL and INTL block sizes must be a multiple of double word
(4 bytes).
Fig 4. Recommended values of the ISP1362 buffer memory allocation
Rev. 05 — 8 May 2007
0FFFh
07FFh
0A00h
03FFh
09FFh
0000h
0800h
0400h
ATL area (1536 bytes)
ISTL0 area (512 bytes)
ISTL1 area (512 bytes)
INTL area (512 bytes)
004aaa053
Single-chip USB OTG Controller
© NXP B.V. 2007. All rights reserved.
ISP1362
15 of 152