CP2201-GM Silicon Laboratories Inc, CP2201-GM Datasheet - Page 77

• Manufacturer Part Number: CP2201-GM
• Description: IC ETH CTRLR SNGL-CHIP 28QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of CP2201-GM

• Package / Case: 48-TQFP, 48-VQFP
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: Parallel/Serial
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 75mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Ethernet Connection Type: 1000BASE-T or 100BASE-T or 10BASE-T
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Standard Supported: IEEE 802.3
• Data Rate: 10 Mbps or 100 Mbps or 1000 Mbps
• Maximum Operating Temperature: + 85 C
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3
• Interface Type: Parallel
• Supply Current: 60mA
• Supply Voltage Range: 3.1V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1326 - KIT REF DESIGN PWR OVER ETHERNET336-1316 - KIT EVAL FOR CP2201 ETH CTRLR
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1313

Bits7–0: FLASHDATA: Flash Read/Write Data Register
Bits7–0: FLASHAUTORD: Flash AutoRead Data Register
Bits 7–2: UNUSED. Read = 000000b, Write = don’t care.
Bit 1:
Bit 0:
R/W
R/W
Bit7
Bit7
Bit7
—
R
Read:
Value of the Flash byte at the location specified by FLASHADDRH:FLASHADDRL.
Write:
Initiates a Flash write operation to the Flash byte at the address in FLASHADDRH:FLASHADDRL.
The Flash memory must be unlocked, and the target Flash byte should have a value of 0xFF (value
of erased Flash).
Reads from this register return the value of the Flash byte at the location specified by the Flash
Address Register. The Flash Address Register is automatically incremented by 1 after the read.
Reserved. Must write 0b.
FLEGO: Flash Erase Start.
Writing a ‘1’ to this bit initiates a Flash erase operation on the 512-byte page of Flash containing the
Flash byte at the location specified in the Flash Address Register. The Flash memory must be
unlocked prior to starting a Flash erase operation.
R/W
R/W
Bit6
Register 64. FLASHAUTORD: FLASH AutoRead Data Register
Bit6
Bit6
—
R
Register 63. FLASHDATA: FLASH Read/Write Data Register
Register 65. FLASHERASE: FLASH Erase Register
R/W
R/W
Bit5
Bit5
Bit5
—
R
R/W
R/W
Bit4
Bit4
Bit4
—
R
R/W
R/W
Bit3
Bit3
—
R
B
Rev. 1.0
R/W
R/W
Bit2
Bit2
Bit2
—
R
Reserved
R/W
R/W
Bit1
Bit1
Bit1
R
FLEGO
R/W
R/W
Bit0
Bit0
Bit0
R
CP2200/1
00000000
00000000
00000000
Reset Value
Reset Value
Reset Value
Address:
Address:
Address:
0x6A
0x06
0x05
77