ISP1181ABSUM ST-Ericsson Inc, ISP1181ABSUM Datasheet - Page 63

• Manufacturer Part Number: ISP1181ABSUM
• Description: IC USB HOST CTRL FULL-SPD 48HVQF
• Manufacturer: ST-Ericsson Inc

Specifications of ISP1181ABSUM

• Controller Type: USB Peripheral Controller
• Interface: Parallel
• Voltage - Supply: 3.3V, 5V
• Current - Supply: 26mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ISP1181ABS-T; ISP1181ABS-T

Philips Semiconductors
22. Test information
9397 750 13959
Product data
21.2.4 Using H8S/2357 I/O Ports
In the interface circuit of
general purpose output port. This pin drives the ISP1181A’s WAKEUP input to
generate a remote wake-up.
The H8S/2357 has 3 registers to configure port 1: Port 1 Data Direction Register
(P1DDR), Port 1 Data Register (P1DR) and Port 1 Register (PORT1). Only registers
P1DDR and P1DR must be configured, register PORT1 is only used to read the
actual levels on the port pins.
The dynamic characteristics of the analog I/O ports (D and D
were determined using the circuit shown in
•
Fig 33. Load impedance for D and D pins.
H8S/2357:
– select pin P1.1 to be an output in register P1DDR
– program the desired bit value for P1.1 in register P1DR.
Load capacitance:
Speed:
C
full-speed mode only: internal 1.5 k pull-up resistor on D
L
= 50 pF (full-speed mode)
Rev. 05 — 08 December 2004
Figure 31
D.U.T
pin P1.1 of the H8S/2357 is configured as a
22
test point
Figure
Full-speed USB peripheral controller
15 k
33.
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
C L
50 pF
MGS784
as listed in
ISP1181A
Table
62 of 70
56,