ISP1362EE ST-Ericsson Inc, ISP1362EE Datasheet - Page 124

• Manufacturer Part Number: ISP1362EE
• Description: IC USB CTRL SNGL CHIP 64TFBGA
• Manufacturer: ST-Ericsson Inc

Specifications of ISP1362EE

• Controller Type: USB 2.0 Controller
• Interface: Parallel/Serial
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -

NXP Semiconductors
ISP1362_5
Product data sheet
Table 142. DcInterrupt register: bit description
Bit
31 to 24
23 to 10
9
8
7
6
5
4
3
2
1
0
Symbol
-
EP14 to EP1
EP0IN
EP0OUT
BUSTATUS
SP_EOT
PSOF
SOF
EOT
SUSPND
RESUME
RESET
Rev. 05 — 8 May 2007
Description
reserved
Logic 1 indicates the interrupt source(s): endpoints 14 to 1.
Logic 1 indicates the interrupt source: control IN endpoint.
Logic 1 indicates the interrupt source: control OUT endpoint.
Monitors the current USB bus status (0 = awake, 1 = suspend).
Logic 1 indicates that an EOT interrupt has occurred for a short
period.
Logic 1 indicates that an interrupt is issued every 1 ms because of
the pseudo SOF; after three missed SOFs, the ‘suspend’ state is
entered.
Logic 1 indicates that an SOF condition was detected.
Logic 1 indicates that an internal EOT condition was generated by
the DMA Counter reaching zero.
Logic 1 indicates that an ‘awake’ to ‘suspend’ change of state was
detected on the USB bus.
Logic 1 indicates that a ‘resume’ state was detected.
Logic 1 indicates that a bus reset condition was detected.
Single-chip USB OTG Controller
© NXP B.V. 2007. All rights reserved.
ISP1362
123 of 152