ACD2X2 Bogen Communications, Inc., ACD2X2 Datasheet - Page 2

• Manufacturer Part Number: ACD2X2
• Description: Speaker; Self Amplified 2X2 Drop-In Tile Speaker; Recessed Volume Control
• Manufacturer: Bogen Communications, Inc.

Specifications of ACD2X2

• Connection Type: Wire leads via wire nuts (included)
• Dimensions: 24 W × 24 D
• Finish: Non-reflective finish, available in off-white
• Frequency Response: 95 Hz to 12 kHz
• Power: 1 W
• Weight: 12 Lbs.
• Lead Free Status / Rohs Status: RoHS Compliant part

The speaker shall be a Bogen Model ACD2X2 Drop-In Self-Amplified Ceiling Speaker, which shall be fully enclosed and constructed of indus-
trial grade steel. It shall be comprised of a damped high-compliance factory-mounted loudspeaker that shall consist of an 8" treated paper
main cone, a secondary high frequency cone, and a 10-ounce magnet. The unit shall have a 1-watt amplifier. The typical current consump-
tion shall be 1 CU (50 mA). Frequency response shall be 95 Hz - 12 kHz. Input sensitivity shall be 125 mV rms with max. SPL @ 94 dB (1M).
Input impedance shall be 2k ohms. Dispersion shall be 100°. The speaker shall have a non-reflective, off-white or bright white (“U” version)
finish metal grille with a recessed volume control accessible through front grille. It shall include 4 seismic attachment points.
The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling grids. For 2' x 2' installations, support rails shall not be required and no cuts to the
ceiling shall be necessary. For 2' x 4' installations, a single cut to the ceiling tile and an included support rail shall be required. The speaker
shall measure 23-7/8" W x 5" H x 23-7/8" D and shall weigh 12 lb.
Architect and Engineer Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: [phone] Fax: [phone] www.bogen.com
Self-Amplified Drop-In Ceiling Speaker: ACD2X2 & ACD2X2U
ACD2X2U
ACD2X2
Model
●
●
●
●
●
●
ATTACHMENT
POINTS (4X)
SEISMIC
Frequency Response . . . . . . . . . . 95 Hz - 12 kHz
Max. SPL @ 1W / 1m . . . . . . . . . . 94 dB
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . . 8" main cone with secondary
Maximum Amplifier Output . . . . . .1W
Typical Operational Current . . . . .1 CU (50 mA)
Input Impedance . . . . . . . . . . . . . .2000 ohms
Typical Input Sensitivity . . . . . . . . .125 mV rms
Supply Voltage . . . . . . . . . . . . . . . .24V DC
Magnet Weight . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . .Via wire nuts
Dimensions . . . . . . . . . . . . . . . . . .23-7/8" W x 5" H x 23-7/8" D
Product Weight . . . . . . . . . . . . . . .12 lb.
Plenum-rated, complies with requirements of standard UL-2043.
S P E C I F I C A T I O N S
Specifications subject to change without notice.
high frequency cone
© 2006 Bogen Communications, Inc.
Part No. 54-9273-01D 0902
(included in electrical box)