PI7C8150BNDE Pericom Semiconductor, PI7C8150BNDE Datasheet - Page 43
![IC PCI-PCI BRIDGE ASYNC 256-PBGA](/photos/6/93/69399/pi7c8150bnde_sml.jpg)
PI7C8150BNDE
Manufacturer Part Number
PI7C8150BNDE
Description
IC PCI-PCI BRIDGE ASYNC 256-PBGA
Manufacturer
Pericom Semiconductor
Datasheet
1.PI7C8150BNDE.pdf
(109 pages)
Specifications of PI7C8150BNDE
Applications
*
Interface
*
Voltage - Supply
*
Package / Case
256-PBGA
Mounting Type
Surface Mount
Case
BGA
Dc
06+
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PI7C8150BNDE
Manufacturer:
CYPRESS
Quantity:
101
Part Number:
PI7C8150BNDE
Manufacturer:
PERICOM
Quantity:
20 000
4.2.2
4.3
ISA MODE
PI7C8150B supports ISA mode by providing an ISA enable bit in the bridge control
register in configuration space. ISA mode modifies the response of PI7C8150B inside the
I/O address range in order to support mapping of I/O space in the presence of an ISA bus in
the system. This bit only affects the response of PI7C8150B when the transaction falls
inside the address range defined by the I/O base and limit address registers, and only when
this address also falls inside the first 64KB of I/O space (address bits [31:16] are 0000h).
When the ISA enable bit is set, PI7C8150B does not forward downstream any I/O
transactions addressing the top 768 bytes of each aligned 1KB block. Only those
transactions addressing the bottom 256 bytes of an aligned 1KB block inside the base and
limit I/O address range are forwarded downstream. Transactions above the 64KB I/O
address boundary are forwarded as defined by the address range defined by the I/O base
and limit registers.
Accordingly, if the ISA enable bit is set, PI7C8150B forwards upstream those I/O
transactions addressing the top 768 bytes of each aligned 1KB block within the first 64KB
of I/O space. The master enable bit in the command configuration register must also be set
to enable upstream forwarding. All other I/O transactions initiated on the secondary bus are
forwarded upstream only if they fall outside the I/O address range.
When the ISA enable bit is set, devices downstream of PI7C8150B can have I/O space
mapped into the first 256 bytes of each 1KB chunk below the 64KB boundary, or anywhere
in I/O space above the 64KB boundary.
MEMORY ADDRESS DECODING
PI7C8150B has three mechanisms for defining memory address ranges for forwarding of
memory transactions:
This section describes the first two mechanisms. Section 4.4.1 describes VGA mode. To
enable downstream forwarding of memory transactions, the memory enable bit must be set
in the command register in configuration space. To enable upstream forwarding of memory
transactions, the master-enable bit must be set in the command register. The master-enable
bit also allows upstream forwarding of I/O transactions if it is set.
CAUTION
If any configuration state affecting memory transaction forwarding is changed by a
configuration write operation on the primary bus at the same time that memory
transactions are ongoing on the secondary bus, response to the secondary bus memory
transactions is not predictable. Configure the memory-mapped I/O base and limit address
registers, prefetchable memory base and limit address registers, and VGA mode bit before
setting the memory enable and master enable bits, and change them subsequently only
when the primary and secondary PCI buses are idle.
Memory-mapped I/O base and limit address registers
Prefetchable memory base and limit address registers
VGA mode
Page 43 of 109
ASYNCHRONOUS 2-PORT PCI-TO-PCI BRIDGE
ADVANCE INFORMATION
April 2009 – Revision 1.08
PI7C8150B