PS710BL-1A-E3-A CALIFORNIA EASTERN LABS, PS710BL-1A-E3-A Datasheet - Page 13
![no-image](/images/manufacturer_photos/0/1/119/california_eastern_labs_sml.jpg)
PS710BL-1A-E3-A
Manufacturer Part Number
PS710BL-1A-E3-A
Description
Manufacturer
CALIFORNIA EASTERN LABS
Datasheet
1.PS710BL-1A-E3-A.pdf
(16 pages)
Specifications of PS710BL-1A-E3-A
Input Type
DC
Output Type
AC/DC
Input Voltage (max)
1.4V
Output Voltage (max)
60V
Input Current (max)
50mA
Output Current
2.5A
Circuit Arrangement
1 Form A
Package Type
PDIP SMD
Output Device
MOSFET
Pin Count
6
Mounting
Surface Mount
Operating Temp Range
-40C to 85C
Operating Temperature Classification
Industrial
Rad Hardened
No
Lead Free Status / Rohs Status
Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PS710BL-1A-E3-A
Manufacturer:
CEL
Quantity:
31 000
<R>
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
(4) Cautions
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
• Fluxes
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10064EJ03V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
PS710B-1A,PS710BL-1A
260˚C MAX.
220˚C
11