SI3019-F-FT Silicon Laboratories Inc, SI3019-F-FT Datasheet - Page 84

• Manufacturer Part Number: SI3019-F-FT
• Description: IC VOICE DAA GCI/PCM/SPI 16TSSOP
• Manufacturer: Silicon Laboratories Inc
• Type: Chipsetr

Specifications of SI3019-F-FT

• Package / Case: 16-TSSOP
• Function: Data Access Arrangement (DAA)
• Interface: GCI, PCM, SPI
• Number Of Circuits: 1
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 8.5mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Includes: Line Voltage Monitor, Loop Current Monitor, Overload Detection, Parallel Handset Detection, Polarity Reversal Detection, TIP and
• Product: Modem Chip
• Supply Voltage (min): 3 V
• Supply Current: 8.5 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Si3050
Register 33. PCM/SPI Mode Select
Reset settings = 0000_0000
84
Bit
4:3
7
6
5
2
1
0
Name
Type
Bit
PCMF[1:0]
Reserved
PCME
Name
PCML
PHCF
SPIM
TRI
PCML
R/W
D7
PCM Analog Loopback.
0 = Normal operation.
1 = Enables analog data to be received from the line, converted to digital data and trans-
mitted across the ISOcap link. The data passes through the RX filter and is looped back
through the TX filter and is transmitted back out to the line.
SPI Mode.
0 = Normal Operation; SDO tri-states on rising edge of CS.
1 = Causes SDO to tri-state on rising edge of LSB of SCLK.
PCM Enable (Registers 34–37 should be set before PCM transfers are enabled).
0 = Disable PCM transfers.
1 = Enable PCM transfers.
PCM Data Format.
00 = A-Law. Signed magnitude data format (refer to Table 22 on page 44).
01 = µ-Law. Signed magnitude data format (refer to Table 21 on page 43).
10 = 8-bit linear. The top 8-bits of the 16-bit linear signal are transferred, and the bottom
8-bits are discarded (2s complement data format).
11 = 16-bit linear (2s complement data format).
PCM Highway Clock Format.
0 = 1 PCLK per data bit.
1 = 2 PCLKs per data bit.
Tri-state Bit 0.
0 = Tri-state bit 0 on positive edge of PCLK.
1 = Tri-state bit 0 on negative edge of PCLK.
Always write this bit to zero.
SPIM
R/W
D6
PCME
R/W
D5
Rev. 1.2
D4
PCMF[1:0]
R/W
Function
D3
R/W
D2
0
PHCF
R/W
D1
R/W
TRI
D0