HDMP-0552 Avago Technologies, HDMP-0552 Datasheet

no-image

HDMP-0552

Manufacturer Part Number
HDMP-0552
Description
Manufacturer
Avago Technologies
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
HDMP-0552
Manufacturer:
AGILENT
Quantity:
1 000
Description
The HFBR-57M5AP is a state of the art transceiver de-
signed to provide a cost effective, high performance
solution for 2.125 GBd Fibre Channel, 1.0625 GBd Fibre
Channel and 1.25 GBd Ethernet applications.
As an enhancement to the conventional SFP interface
defined in SFF-8074i, the HFBR-57M5AP implements
the digital diagnostic interface MSA SFF-8472. Real
time monitors of temperature, supply voltage, laser bias
current, laser average output power and received input
power OMA are provided via a two-wire serial interface.
This information is an addition to the conventional SFP
data.
Installation
The HFBR-57M5AP can be installed in any SFF-8074i
compliant Small Form Pluggable (SFP) port. The HFBR-
57M5AP is hot-pluggable, allowing the module to be
installed while the host system is operating and on-line.
Upon insertion, the transceiver housing makes initial
contact with the host board SFP cage, mitigating poten-
tial damage due to Electro-Static Discharge (ESD).
Digital Diagnostic Small Form Pluggable Transceiver for Fibre
Channel 2.125, 1.0625 GBd and 1.25 GBd Ethernet
Data Sheet
Related Products
HFBR-0534: Evaluation Kit for Avago Technologies
SFP’s with Diagnostic Monitoring Interface (DMI)
HFBR-5720AL/ALP: 850 nm +3.3 V LC SFP for
2.125/1.0625 GBd Fibre Channel
HFBR-5921AL: 850 nm +3.3 V LC SFF 2x5 for
2.125/1.0625 GBd Fibre Channel
HDMP-2630/2631: +3.3 V 2.125/1.0625 GBd SerDes
TRx family of Physical Layer ICs
HDMP-0552: +3.3 V Quad Port Bypass Circuit for
2.125/1.0625 GBd FC-AL applications
HPFC-5000 Series Tachyon Fibre Channel Protocol ICs
for 2.125/1.0625 GBd Applications
Features
Applications
SFF-8472 Diagnostic Monitoring Interface (DMI) for
Optical Transceivers with real time monitors of:
- Transmitted Optical Power
- Received Optical Power
- Laser Bias Current
- Temperature
- Supply Voltage
SFP Transceiver Specification
- SFF-8074i (Rev 1.0)
- SFF-8472 (Rev 9.3)
- 2.125 GBd operation for FC-PI 200-M5-SN-I
- 1.0625 GBd operation for FC-PI 100-M5-SN-I
- 1.250 GBd operation for IEEE 802.3 Gigabit Ethernet
Alarms and warnings to indicate status of real time
monitors
LC Duplex optical connector interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10)
- Wide temperature and supply voltage operation
High reliability < 100 FIT @ +50 °C
850 nm VCSEL Source Technology
IEC 60825-1 Class 1/CDRH Class 1 laser eye safe
Fibre Channel Systems
- Director Class Switches
- Fabric Switches
- HBA Cards
Mass Storage
1000BASE-SX

Related parts for HDMP-0552

HDMP-0552 Summary of contents

Page 1

... GBd Fibre Channel • HDMP-2630/2631: +3.3 V 2.125/1.0625 GBd SerDes TRx family of Physical Layer ICs • HDMP-0552: +3.3 V Quad Port Bypass Circuit for 2.125/1.0625 GBd FC-AL applications • HPFC-5000 Series Tachyon Fibre Channel Protocol ICs for 2.125/1.0625 GBd Applications Features • ...

Page 2

Digital Diagnostic Interface and Serial Identification The 2-wire serial protocol is based on the ATMEL AT- 24C01A series EEPROM protocol and signaling detail. The HFBR-57M5AP contains conventional SFP memory per SFF-8074i as well as additional memory (address 0xA2) for new ...

Page 3

... RX_LOS can be also be monitored via the two-wire serial (ad- dress A2, byte 110, bit 1). 3.3 V Tx_FAULT VREFR VREFR TX[0:9] TBC TBC EWRAP EWRAP HDMP-2630/31 PROTOCOL IC RX[0:9] RBC RBC Rx_RATE Rx_RATE REFCLK Rx_LOS GPIO(X) GPIO(X) GP14 REFCLK 106 ...

Page 4

... Japan. The metal housing and shielded design of the HFBR-57M5AP provides excellent EMI performance. Eye Safety The HFBR-57M5AP transceivers provide Class 1 eye safety by design. Avago Technologies has tested the transceiver design for regulatory compliance, under normal operating conditions and under a single fault condition. See Table 1. ...

Page 5

Pin Out Table Pin Name Function/Description Transmitter Ground EE 2 TX_FAULT Transmitter Fault Indication - High indicates a fault condition 3 TX_DISABLE Transmitter Disable - Module opti cal output disables on high or open 4 MOD-DEF2 Module ...

Page 6

Absolute Maximum Ratings Parameter Case Operating Temperature Ambient Operating Temperature Relative Humidity Module Supply Voltage Control Input Voltage Notes: 1. Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for ...

Page 7

Transceiver Electrical Characteristics TC = -10 °C to +85 ° 3.3 V ± 10 Parameter Data Input: Transmitter Differential Input Voltage (TD±) Data Output: Receiver Differential Output Voltage (RD±) Contributed Deterministic Jitter (Receiver) ...

Page 8

Transmitter Optical Characteristics TC = -10 °C to +85 ° 3.3 V ± 10 Parameter Modulated Optical Output Power (OMA, pk-pk) 2.125 Gb/s Modulated Optical Output Power (OMA, pk-pk) 1.0625 Gb/s Average Optical ...

Page 9

Receiver Optical Characteristics TC = -10 °C to +85 ° 3.3 V ± 10 Parameter Input Optical Power Input Optical Modulation Amplitude (OMA, Pk-Pk) 2.125 Gb/s Input Optical Modulation Amplitude (OMA, Pk-Pk) 1.0625 ...

Page 10

... Time from RX_LOS transition to RX_LOS assert per Figure 4. 7. Time from non-RX_LOS transition to RX_LOS de-assert per Figure 4. 8. Contact Avago Technologies for applications requiring higher Serial ID clock rate. Typical Transceiver Digital Diagnostic Monitor (Real Time Sense) Characteristics TC = -10 °C to +85 ° 3.3 V ± ...

Page 11

Address A0 as per MSA 0 Serial ID defined by SPF MSA (96 Bytes) 95 Vendor Specific (32 Bytes) 127 Reserved in SFP MSA (128 Bytes) 255 Figure 4. Memory Map 11 Address A2 as per MSA 0 Alarm and ...

Page 12

V > 2. Tx_FAULT Tx_DISABLE TRANSMITTED SIGNAL t_init t-init: TX DISABLE NEGATED V > 2. Tx_FAULT Tx_DISABLE TRANSMITTED SIGNAL t_init INSERTION t-init: TX DISABLE NEGATED, MODULE HOT PLUGGED OCCURANCE OF FAULT Tx_FAULT Tx_DISABLE TRANSMITTED SIGNAL t_fault ...

Page 13

Table 2. EEPROM Serial ID Memory Contents – Conventional SFP Memory (Address A0h) Address Hex ASCII Address ...

Page 14

Table 3. Alarms and Warning Values – Enhanced Feature Set Memory (Address A2h) High Warning Real-Time Hex Real Value Monitor RX OMA 2AF8 1 0F8D -4 dBm Ibias 109A 8.5 mA Temp 5500 +85 °C V 8DCC 3.63 ...

Page 15

... TX RX AREA FOR PROCESS PLUG DIMENSIONS ARE IN MILLIMETERS (INCHES) Figure 6a. Drawing of SFP Transceiver 15 Avago Technologies HFBR-57M5AP 850 nm LASER PROD 21CFR(J) CLASS 1 COUNTRY OF ORIGIN YYWW XXXXXX 13.8±0.1 [0.541±0.004] 2.60 [0.10] 55.2±0.2 [2.17±0.01] FRONT EDGE OF SFP TRANSCEIVER CAGE 6 ...

Page 16

X Y 16.25 MIN. PITCH B PCB EDGE 5.68 8.58 11.08 16.25 14.25 REF . 2.0 11x 3 3.2 PIN 1 10.93 9.6 0.8 TYP . 1.55 ± 0.05 ∅ 0 DET ...

Page 17

PCB [1.64±.02] 15MAX .59 CAGE ASSEMBLY 12.4REF .49 9.8MAX .39 Figure 6c. 1.7±0.9 [.07±.04] AREA BEZEL FOR PROCESS PLUG Tcase REFERENCE POINT 10REF 1.15REF .39 .05 TO PCB BELOW PCB 0.4±0.1 [.02±0.004] BELOW PCB DIMENSIONS ARE IN ...

Page 18

... For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. ...

Related keywords