P11L Vishay Semiconductors, P11L Datasheet - Page 9

• Manufacturer Part Number: P11L
• Manufacturer: Vishay Semiconductors

www.vishay.com
9
P11L
Vishay Sfernice
APPLICATION NOTE
The potentiometer shall be used in voltage divider with
an impedance load at least 100 times higher than the total
potentiometer nominal resistance value.
Advised load impedance:
1 MΩ min. for resistance range of 1 kΩ to 50 kΩ
P11 OPTION: NEUTRAL MODULES “EN”
Neutral or screen module is housed in a standard P11 module.
It is used as a screen between two electrical modules.
The leads can be connected to ground.
ORDERING INFORMATION (First order only for special code creation)
EN
P11 OPTION: SPECIAL LINEARITY - CONFORMITY
ORDERING INFORMATION (First order only)
J123
J145
J123
EN
V
Neutral module
Independent linearity ± 3 % (linear law)
Independent linearity ± 2 % (linear law)
E
V
Effective electrical travel
linearity test
Limits of
For technical questions, contact:
Long Life Cermet Potentiometer
2 Million Cycles
The independent linearity (conformity for the non linear laws) is
the maximum gap ΔV between the actual variation curve and the
theorical variation curve the nearest to it. The linearity and the
conformity are expressed in percentage of the total applied
voltage E
They are measured over 90 % of actual electrical travel
(centered).
On request linearity can be guaranteed in linear law.
For other request, contact us.
[e-mail]
Linearity conformity
(1) a
c (3)
(2) b
cw
=
± ΔV
---------------------- -
Document Number: 51060
1 MΩ min.
E
max.
Revision: 06-Apr-09