SAM3S4B Atmel Corporation, SAM3S4B Datasheet - Page 963

• Manufacturer Part Number: SAM3S4B
• Manufacturer: Atmel Corporation

Specifications of SAM3S4B

• Flash (kbytes): 256 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 64 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 23
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 79
• Ext Interrupts: 79
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Full Speed
• Usb Interface: Device
• Spi: 3
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 10
• Adc Resolution (bits): 12
• Adc Speed (ksps): 1000
• Analog Comparators: 1
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 12
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 48
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

38. Analog Comparator Controller (ACC)
38.1
38.2
6500C–ATARM–8-Feb-11
Description
Embedded Characteristics
The Analog Comparator Controller configures the Analog Comparator and generates an inter-
rupt according to the user settings. The analog comparator embeds 8 to 1 multiplexers on both
inputs.
The Analog Comparator compares two voltages and the result of this comparison gives a com-
pare output. The user can select a high-speed or low-power option. Additionally, the hysteresis
level, edge detection and polarity are configurable.
The ACC can also generate a compare event which can be used by the PWM.
Refer to
• One analog comparator
• High speed option vs. low power option
• Selectable input hysteresis:
• Minus input selection:
• Plus input selection:
• output selection:
• Interrupt on:
– 0, 20 mV, 50 mV
– DAC outputs
– Temperature Sensor
– ADVREF
– AD0 to AD3 ADC channels
– All analog inputs
– Internal signal
– external pin
– selectable inverter
– Rising edge, Falling edge, toggle
Figure 38-1 on page 964
for detailed schematics.
SAM3S
963