SAM9G10 Atmel Corporation, SAM9G10 Datasheet - Page 847

• Manufacturer Part Number: SAM9G10
• Manufacturer: Atmel Corporation

Specifications of SAM9G10

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 266 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 4
• Ssc: 3
• Sd / Emmc: 1
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.08 to 1.32
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

39.7.8.11
Figure 39-43. Response Data Length
11053B–ATARM–22-Sep-11
11053B–ATARM–22-Sep-11
Break
Sync
Response Data Length
Sync
Field
The LIN response data length is the number of data fields (bytes) of the response excluding the
checksum.
The response data length can either be configured by the user or be defined automatically by
bits 4 and 5 of the Identifier (compatibility to LIN Specification 1.1). The user can choose
between these two modes by the DLM bit of the LIN Mode register (US_LINMR):
Table 39-15. Response Data Length if DLM = 1
• DLM = 0: the response data length is configured by the user via the DLC field of the LIN
• DLM = 1: the response data length is defined by the Identifier (IDCHR in US_LINIR)
Mode register (US_LINMR). The response data length is equal to (DLC + 1) bytes. DLC can
be programmed from 0 to 255, so the response can contain from 1 data byte up to 256 data
bytes.
according to the table below. The DLC field of the LIN Mode register (US_LINMR) is
discarded. The response can contain 2 or 4 or 8 data bytes.
Identifier
IDCHR[5]
Field
0
0
1
1
Data
Field
User configuration: 1 - 256 data fields (DLC+1)
Identifier configuration: 2/4/8 data fields
IDCHR[4]
Data
Field
0
1
0
1
Data
Field
Response Data Length [bytes]
2
2
4
8
Data
Field
SAM9G35
SAM9G35
Checksum
Field
847
847