406508-6 TE Connectivity, 406508-6 Datasheet
406508-6
Manufacturer Part Number
406508-6
Description
Manufacturer
TE Connectivity
Specifications of 406508-6
Product Type
Connector
Jack Type
RJ45
Pcb Mounting Orientation
Side Entry (Right Angle)
Pcb Mount Style
Through Hole
Termination Method To Pc Board
Solder
Performance Category
Cat 5
Number Of Contacts Loaded
8
Grounding Options
Without
Panel Stops
Without
Keyed
No
Profile
Standard
Color
Black
Insertion Force
ZIF
Jack Configuration
1 x 1
Panel Mount Retention
With
Flanged
No
Shielded
No
Solder Tail Contact Plating
Tin-Lead over Nickel
Height (mm [in])
12.83 [0.505]
Port Configuration
Single
Number Of Positions
8
Inverted Jack Face
Yes
Led
With
Pcb Tail Length (mm [in])
2.54 [0.100]
Insulator Material
Polyester
Preloaded
Yes
Contact Plating, Mating Area, Material
Gold (50)
Contact Base Material
Phosphor Bronze
Housing Material
High Temperature Thermoplastic
Ul Flammability Rating
UL 94V-0
Rohs/elv Compliance
ELV compliant, 5 of 6 Compliant
Lead Free Solder Processes
Wave solder capable to 240°C
Led Position 1 Color
Yellow
Led Position 2 Color
Yellow
Led Position 3 Color
None
Pcb Thickness, Recommended (mm [in])
1.57 [0.062]
Packaging Method
Tray
1.
1.1.
1.2.
1.3.
2.
2.1.
2.2.
3.
3.1.
3.2.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers the performance, tests and quality requirements for TE Connectivity (TE) high
performance modular plugs and jacks designed for printed circuit board mounting.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
Qualification Test Results
Successful qualification testing on the subject product line was completed on 31Mar97. The test file
number for this testing is 501-91-2. This documentation is on file at and available from Engineering
Practices and Standards (EPS).
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and the referenced documents,
this specification shall take precedence.
TE Documents
!
!
!
!
!
Reference Documents
!
!
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
109-1: Test Specification (General Requirements for Test Specifications)
109 Series: Test Specifications as indicated in Figure 1
114-2048: Application Specification (Modular Jacks)
114-6053: Application Specification (High Performance Modular Plug Connectors)
501-91-2: Qualification Test Report (High Performance Modular Plugs & Jacks, PCB Mounted)
108-1163: Product Specification (Modular Plugs, Thru-Hole and Surface Mount Jacks, Data and
Telephone, PCB Mounted)
502-1064: Engineering Report (High Performance PCB Modular Jacks)
| Indicates change
*Trademark
Product
Specification
High Performance Modular Plugs & Jacks, PCB Mounted
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1163-2
11Mar11 Rev C
1 of 4
LOC B
Related parts for 406508-6
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Printers THERMAL PRINTER HS-SLEEVE MARKER
Manufacturer:
TE Connectivity
Part Number:
Description:
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
Manufacturer:
TE Connectivity
Datasheet:
406508-6 Summary of contents
Page 1
... High Performance Modular Plugs & Jacks, PCB Mounted 1. SCOPE 1.1. Content This specification covers the performance, tests and quality requirements for TE Connectivity (TE) high performance modular plugs and jacks designed for printed circuit board mounting. 1.2. Qualification When tests are performed on the subject product line, procedures specified in Figure 1 shall be used. ...
Page 2
Ratings ! Voltage: 150 volts AC ! Current: Signal application only, 1.5 amperes AC rms maximum at 25° C derated to .2 ampere AC rms maximum at 70° C ambient ! Temperature: • Jacks: -40 to 85° C • ...
Page 3
QUALITY ASSURANCE PROVISIONS 4.1. Qualification Testing A. Sample Selection Samples shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. Test group 1 shall consist of 10 terminated plugs/unmounted jack pairs. ...
Page 4
Rev C Figure 3 108-1163 ...