1565375-4 TE Connectivity, 1565375-4 Datasheet - Page 5

• Manufacturer Part Number: 1565375-4
• Manufacturer: TE Connectivity

Specifications of 1565375-4

• Product Type: Connector
• Connector Type: Connector Assembly
• Receptacle Configuration: 025
• Mount: Printed Circuit Board
• Pcb Mounting Orientation: Vertical
• Number Of Positions: 28
• Contact Type: Tab
• Contact Mating Area Plating (signal): Selective Tin
• Contact Base Material: Brass
• Connector Style: Receptacle
• Housing Material: PBT - GF
• Housing Color: Natural
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Packaging Method: Paper Box, Tube

Rev. H6
3.5.23
3.5.24
3.5.25
3.5.26
3.5.27
3.5.28
3.5.19
3.5.20
3.5.21
3.5.22
Handling Ergonomics
Retention Force
of Tab
Resistance to
soldering heat
Thermal Shock
Humidity
Industrial Gas (SO
Temperature Life
(Heat Aging)
Resistance to Cold
Humidity-Temperature
Cycling
Dust Bombardment
(Steady State)
2
)
No abnormalities allowed in
manual mating/unmating
handling.
20N Min. (PBT housing)
15N Min. (SPS housing)
Application to SPS housing only.
No gap with PCB and omission of
screw.
Retention Force of Tab : 15N Min.
Satisfy requirements of test
item on the “3.6 sequence”.
Satisfy requirements of test
item on the “3.6 sequence”.
Current Leakage
Satisfy requirements of test
item on the “3.6 sequence”.
Satisfy requirements of test
item on the “3.6 sequence”.
Satisfy requirements of test
item on the “3.6 sequence”.
Satisfy requirements of test
item on the “3.6 sequence”.
Satisfy requirements of test
item on the “3.6 sequence”.
: 3mA Max.
Product Specification
Environmental Requirements
Fig.3 (To be continued)
Manually operated.
Measure the retention force between
housing and tab contact.
Operation speed : 100mm/min
Test connector solder dipped after
mounted on PCB with screw.
It should be checked and measured
after test connector become room
temperature.
Solder temperature : 260±5℃
Immersion duration : 10±1sec.
TE Spec.109-5204 Condition B
-40℃/30min., 100℃/30min.
Making this a cycle, repeat 1000
cycles.
Monitor resistance-variation at
closed circuit current of 10mA during
the test.
TE Spec. 109-5103
90～95%R. H. , 60℃ , 96hours
Monitor current leakage during the
test.
TE Spec. 109-5105
Unmated connector
SO
25℃, 96 hours
TE Spec. 109-5107
120℃, 120hours
TE Spec. 109-5104
-40℃, 120hours
TE Spec. 109-5108
Condition : Fig. 10
Monitor resistance-variation at
closed circuit current of 10mA during
the test.
Subject JIS R 5210 cement blow of
1.5kg per 10 seconds in 15 minutes
intervals for 8 cycles, with
mating/unmating per 2 cycles.
TE Spec. 109-5110
Making this condition a cycle,
Repeat 10 cycles.
2
Gas : 25ppm, 75% R. H.
108-5668
5 of 12