TMPM382FSFG Toshiba, TMPM382FSFG Datasheet - Page 67

• Manufacturer Part Number: TMPM382FSFG
• Manufacturer: Toshiba

Specifications of TMPM382FSFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 64K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 64
• Package: QFP(14x14)
• Vcc: 5V
• Cpu Mhz: 40
• Ssp (ch) Spi: 1
• I2c/sio (ch): 1
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 10
• 16-bit Timer / Counter: 6
• Motor / Igbt Control: Y
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

7 Exceptions
peripheral IP.
clear the standby mode.
generator. Therefore, it is necessary to set the clock generator in advance. An interrupt from an external
pin can be used without setting the clock generator if it does not function as the clearing standby factor.
7.5.1.2 Interrupt signal generation
7.5.1.3 Transmission of interrupt signal
An interrupt request signal is generated from an external pin assigned as the interrupt factor or a
Set the port control register so that the external pin can perform as an interrupt function pin.
Set the peripheral IP to make it possible to output the interrupt.
See chapters of relevant IP for details.
An interrupt signal from an external pin or a peripheral IP is directly sent to the CPU unless it is used to
An interrupt that can be used to clear the standby mode is transmitted to the CPU via the clock
・From external pin
・From peripheral IP
TMPM380/M382 - 12 / 59 -
TMPM380/M382