TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 133

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

3.7.8
functioning as general-purpose I/O ports, ports A0 to A7 can also, as a Keyboard
interface,operate a Key-on wake-up function. The various functions can each be enabled by
writing a “1” to the corresponding bit of the Port A Function Register (PAFC).
Resetting resets all bits of the register PAFC to “0” and sets all pins to be input port.
generated. An INTKEY interrupt can be used to release all HALT modes.
Port A (PA0 to PA7)
Ports A0 to A7 are 8-bit general-purpose input ports with pull-up resistor. In addition to
When PAFC = “1”, if the input of any of KI0-KI7 pins falls down, an INTKEY interrupt is
INTKEY
Rising edge
-ditection
(on bit basis)
PAFC write
ENABLE
KEY-ON
PA read
8 input OR
Reset
PA0~PA7
Figure 3.7.18 Port A
92CF26A-131
Pull-up resistor
PA0 to PA7
(KI0 to KI7)
TMP92CF26A
2009-06-25