TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 420

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

bmRequestType
bmRequestType
bmRequestType
10000001B
00000001B
10000010B
(9) GET_INTERFACE request
(10) SET_INTERFACE request
(11) SYNCH_FRAME request
SYNCH_FRAME request, write 2byte data in Frame No after confirming
EP0_DSET_A bit of DATASET register is “0”. When completed, access EOP
register, and write “0” to EP0_EOPB bit, so, status stage is completed. This can be
used only where the endpoint supports isochronous transfer type and supports
this request. The process is the same for a vendor request.
This request returns AlternateSetting value that is set by specified interface.
If there is no specified interface, it enters to STALL state.
This request selects AlternateSetting in specified interface.
If there is no specified interface, it enters STALL state.
This request transmits synchronous frame of endpoint.
Automatic answer of this request is not supported.
According to INT_SETUP interrupt, if request received has been identified as a
Please refer to vendor request section.
SYNCH_FRAME
INTERFACE
INTERFACE
bRequest
bRequest
bRequest
GET_
SET_
92CF26A-418
Alternate
wValue
wValue
wValue
setting
0
0
Interface
Interface
Endpoint
wIndex
wIndex
wIndex
wLength
wLength
wLength
1
0
2
TMP92CF26A
Frame No.
Alternate
2009-06-25
setting
Data
Data
None
Data