TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 57

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

6.000 MHz
8.000 MHz
9.000 MHz
10.000 MHz
e)
f)
If the record type is other than 00H, 01H, or 02H
If a checksum error occurs
frequency. If an error is within plus or minus 3%, the boot program decides on that
frequency.
in the case of 10.00 MHz /9600 bps, the baud rate is actually set at 9615.38 bps. To
establish communication, the sum of the baud rate setting error and the measured
frequency error must be within plus or minus 3 %.
User program receive error
Measured frequency/baud rate error
received, the boot program stops operation.
If either of the following error conditions occurs while a user program is being
When the boot program receives matching data, it measures the oscillation
Each baud rate includes a setting error as shown in Table 3.4.13. For example,
Table 3.4.13 Baud Rate Setting Errors (%)
9600 bps
0.2
0.2
0.2
0.2
19200 bps
92CF26A-55
−0.7
0.2
0.2
0.2
38400 bps
−1.4
−
−
−
57600 bps
−
−
−
−
−: Not supported
115200 bps
TMP92CF26A
−
−
−
−
2009-06-25