TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 621

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

3.23.2
3.23.2.1 Analog Reference Voltages
3.23.2.2 Selecting Analog Input Channels
Operation
AN5 pins by setting (ADMOD1<SCAN> = “0”) ADMOD1<ADCH2:0>.
scan modes by setting (ADMOD1<SCAN> = “1”) ADMOD1 <ADCH2:0>.
ADMOD3<HADCH2:0>.
“000”. Since these settings are used for channel selection, the channel fixed input with
the AN0 pin will be selected. Pins not used as analog input channels can be used as
normal ports.
level side to the VREFL pin.
converter.
(1) For normal AD conversion
(2) For top-priority AD conversion
When using an analog input channel in fix mode, select one channel from the AN0 to
When using an analog input channel in scan mode, select one scan mode from the six
Select one channel from the analog input pins AN0 to AN5 by setting
After reset, ADMOD1<SCAN> is initialized to “0” and ADMOD1<ADCH2:0> to
Apply the analog reference voltage's “H” level side to the VREFH pin and the “L”
Selecting an analog input channel depends on the operation mode of the AC
92CF26A-619
TMP92CF26A
2009-06-25