TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 637

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

(6) Transition to the Power Cut mode (PMCCTL<PCM_ON> = 1)
(7) Insert a dummy instruction for waiting for the mode transition time to PCM
(recommended to use 20 NOP instructions)
* You can set both the warm-up time specificatotion bits, PMCCTL<WUTM1:WUTM0>, and the Power
Cut mode enable bit, PMCCTL<PCM_ON>, simultaneously.
* Any writing access to the PMCCTL register, including the warm-up time configuration, is only allowed
upon entering the PCM and immediately after exiting the PCM. The warm-up time must not be
preprogrammed. (The PMCCTL register must be written as 00h at timings other than the above.)
92CF26A-635
TMP92CF26A
2009-06-25