PM8621 PMC-Sierra, Inc., PM8621 Datasheet - Page 53
PM8621
Manufacturer Part Number
PM8621
Description
NSE-8G Standard Product Data Sheet Preliminary
Manufacturer
PMC-Sierra, Inc.
Datasheet
1.PM8621.pdf
(184 pages)
- Current page: 53 of 184
- Download datasheet (946Kb)
9.9.1
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2010850, Issue 1
In-Band Signaling Channel Fixed Overhead
The In-Band Link Controller block generates and terminates two bytes of fixed header and a
CRC-16 per every 32 byte in-band message (total 36 bytes). The two byte header provides control
and status between devices at the ends of the LVDS link. The CRC-16 is calculated over the 32
byte (and header - 34 bytes) in-band message and provides the terminating end the ability to
detect errors in the in-band message. The format of the in-band message and header bytes is
shown in Figure 11 and Figure 12.
Figure 11 In-Band Signaling Channel Message Format
Figure 12 In-Band Signaling Channel Header Format
Table 5 In-band Message Header Fields
Header1
Bit 7
VALID
Header2
Bit 7
AUX[7:0]
Field Name
Valid
Link[1:0]#
1 byte
Header1
Bit 6
LINK[1:0]
Bit 6
1 byte
Header2
NSE-8G to SBS
Message slot contains a message(1)
or is empty(0). If empty this message
will not be put into Rx Message FIFO
(other header information processed
as usual)
These bits are optional for SBI336S
devices, intended for devices which
have multiple redundant links. Each
bit either indicates which Link to use,
Working(0) or Protect(1) when
sourced from the master device, or
which link is being used, when
sourced from the slave device. Other
algorithms are possible to indicate
Working or Protect over these 2 bits
but all SBI336S devices must be able
to revert back to this meaning.
Transmitted immediately.
Bit 5
Bit 5
32 bytes
Free Format Information
Bit4
PAGE[1:0]
Bit4
Bit3
Bit3
NSE-8G™ Standard Product Data Sheet
SBS to NSE
Message slot contains a message(1)
or is empty(0). If empty this message
will not be put into Rx Message FIFO
(other header information processed
as usual)
These bits are optional for SBI336S
devices, intended for devices which
have multiple redundant links. Each
bit either indicates which Link to use,
Working(0) or Protect(1) when
sourced from the master device, or
which link is being used, when
sourced from the slave device. Other
algorithms are possible to indicate
Working or Protect over these 2 bits
but all SBI336S devices must be able
to revert back to this
meaning.Transmitted immediately.
Bit2
USER[2:0]
Bit2
Bit1
Bit1
2 bytes
CRC-16
Bit 0
Bit 0
Preliminary
52
Related parts for PM8621
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Pm Surface Mount Crystals
Manufacturer:
MtronPTI Inc.
Datasheet:
Part Number:
Description:
Pm 100 Series, 100 Watt Open Pcb Constructed Ac-dc Medical
Manufacturer:
RSG Electronic Components GmbH
Datasheet:
Part Number:
Description:
2 Megabit (256K x 8) 5.0 Volt-only CMOS Flash Memory
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Multi-rate Telecom Backplane SERDES for 2.5Gbit/s Interconnect
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
processor, Spectra-9953 Device Driver
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Ethernet, 8 Channel 10/100 Ethernet over SONET/SDH Mapping Device
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Single Chip ADM for 622 & 155Mbit/s
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Single Chip ADM for 622 & 155Mbit/s
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Multi-rate SATURN User Network Interface for 2x622 and 4x155
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR
Manufacturer:
PMC-Sierra, Inc.
Datasheet:
Part Number:
Description:
Processor, SONET/SDH Tributary Unit Payload Processor for 2488.32Mbit/s
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER AND M13 MULTIPLEXER
Manufacturer:
PMC-Sierra, Inc.
Datasheet: