NS2B095AT NICHIA CORPORATION, NS2B095AT Datasheet - Page 8

• Manufacturer Part Number: NS2B095AT
• Description: Specifications For Nichia Chip Type Blue Led
• Manufacturer: NICHIA CORPORATION

(5) Handling Precautions
· Bare Hand
· Tweezers
· Pick and Place
When handling the product, touching encapsulant with bare hands will contaminate its
surface that could affects on optical characteristics.
force to the encapsulant by hands might result in catastrophic failure of the LEDs due to
wire deformation and/or breakage.
When handling it with tweezers, the product should only be held by the package body,
on the short side. Failure to comply might result in chip-out and/or delamination of
encapsulant, and in the worst cases, catastrophic failure of the LEDs due to wire
deformation and/or breakage.
Recommended conditions : Area of outer nozzle ≥ 1.5 mm
Failure to comply might result in damage to encapsulant and in the worst cases,
catastrophic failure of the LEDs due to wire deformation and/or breakage.
(more than 45% of encapsulant top surface)**
Contact area of nozzle with encapsulant ≥ 1.0 mm
(30 to 60% of encapsulant top surface)**
Placement pressure ≤ 3N/mm
Vacuum pressure ≤ 7.8N/ cm
**For reference.
-7-
In the worst cases, excessive
2
2
2
(≤ 0.8 kgf/cm
*max. force : 5N
2
)
2
Nichia STS-DA1-0177C
<Cat.No.090428>