CDSCB Murata Manufacturing Co., CDSCB Datasheet - Page 115

• Manufacturer Part Number: CDSCB
• Description: Ceramic Filter For Audio/visual Equipment
• Manufacturer: Murata Manufacturing Co.

33
!Note
!Note
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with the
marking of products all facing toward the "muRata" mark on
a magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
(2) With an angle of 35 CERAFILr should slip down
(3) Antistatic finish
(4) Recycling
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with the
marking of products all facing toward the "muRata" mark on
a magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
(2) With an angle of 35 CERAFILr should slip down
(3) Antistatic finish
(4) Recycling
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, which
ground terminals are all facing toward the "muRata" mark on
a magazine, and be closed with exclusive stoppers at the
both ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
(2) With an angle of 35 CERAFILr should slip down
(3) Antistatic finish
(4) Recycling
114
Packaging
CERAFILr 455kHz Lead Type SFULA Series
CERAFILr 455kHz Lead Type SFZLA Series
CERAFILr 455kHz Lead Type SFPLA Series
recognizable.
smoothly.
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
recognizable.
smoothly.
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
recognizable.
smoothly.
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
3. Dimensions of Magazine Cassette
3. Dimensions of Magazine Cassette
3. Dimensions of Magazine Cassette
Material : Polycarbonate
Camber of Case : 1mm max. against entire length (reference)
Twist of Case : 0.5mm max. (reference)
Material : Polycarbonate
Camber of Case : 1mm max. against entire length (reference)
Twist of Case : 0.5mm max. (reference)
Material : Polycarbonate
Camber of Case : 1mm max. against entire length (reference)
Twist of Case : 0.5mm max. (reference)
1.1
7.6 0.25
9.0 0.3
1.1
7.6 0.25
1.1
5.6 0.3
1.1 1.1
4.2 0.25
9.0 0.3
1.1
M
*
M
*
M
M
*
390
*
Continued on the following page.
405 1.0
Tolerance unless otherwise specified : 0.2
M
+0
–2
Tolerance unless otherwise specified : 0.2
390
Tolerance unless otherwise specified : 0.2
*
+0
–2
HP51M0003-02
P50E.pdf 03.4.16
in mm
in mm
in mm