LM190E08-TLA1 LG, LM190E08-TLA1 Datasheet - Page 29

• Manufacturer Part Number: LM190E08-TLA1
• Description: LCD Module
• Manufacturer: LG

9-3. ELECTROSTATIC DISCHARGE CONTROL
9-4. PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5. STORAGE
9-6. HANDLING PRECAUTIONS FOR PROTECTION FILM
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge.
Make certain that treatment persons are connected to ground through wrist band etc. And
don’t touch interface pin directly.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
(2) The polarizer surface should not come in contact with any other object.
(1) The protection film is attached to the bezel with a small masking
(2) When the module with protection film attached is stored for a long time,
(3) You can remove the glue easily. When the glue remains on the bezel surface or
Strong light exposure causes degradation of polarizer and color filter.
When storing modules as spares for a long time, the following precautions are necessary.
Ver. 1.0
sometimes there remains a very small amount of glue still on the bezel
after the protection film is peeled off.
the temperature between 5°C and 35°C at normal humidity.
When the protection film is peeled off, static electricity is generated between
the film and polarizer. This should be peeled off slowly and carefully by people who are
electrically grounded and with well ion-blown equipment or in such a condition, etc.
its vestige is recognized, please wipe them off with absorbent cotton waste or
other soft material like chamois soaked with normal-hexane.
It is recommended that they be stored in the container in which they were shipped.
Product Specification
Nov, 30, 2007
tape.
Liquid Crystal Display
LM190E08
www.DataSheet4U.net
29 / 29