MAX1645EEI Maxim, MAX1645EEI Datasheet - Page 18

• Manufacturer Part Number: MAX1645EEI
• Description: Advanced Chemistry-Independent / Level 2 Battery Chargers with Input Current Limiting
• Manufacturer: Maxim

Advanced Chemistry-Independent, Level 2
Battery Charger with Input Current Limiting
Table 2. ChargerMode()
Command: 0x12
*State at chip initial power-on (i.e., V
18
BIT
10
11
12
13
14
15
______________________________________________________________________________________
0
1
2
3
4
5
6
7
8
9
BATTERY_PRESENT_ MASK
AC_PRESENT_MASK
POWER_FAIL_MASK
ENABLE_POLLING
INHIBIT_CHARGE
RESET_TO_ZERO
POR_RESET
HOT_STOP
NAME
DD
from 0 to +3.3V)
0* = Allow normal operation; clear the CHG_INHIBITED flip-flop.
1 = Turn off the charger; set the CHG_INHIBITED flip-flop.
The CHG_INHIBITED flip-flop is not affected by any other commands.
Not implemented
0 = No change.
1 = Change the ChargingVoltage() to 0xFFFF and the ChargingCurrent()
Not implemented
0* = Interrupt on either edge of the AC_PRESENT status bit.
1 = Do not interrupt because of an AC_PRESENT bit change.
0* = Interrupt on either edge of the BATTERY_PRESENT status bit.
1 = Do not interrupt because of a BATTERY_PRESENT bit change.
0* = Interrupt on either edge of the POWER_FAIL status bit.
1 = Do not interrupt because of a POWER_FAIL bit change.
Not implemented
Not implemented
Not implemented
0 = The THERMISTOR_HOT status bit does not turn off the charger.
1* = The THERMISTOR_HOT status bit does turn off the charger.
Not implemented
Not implemented
Not implemented
Not implemented
Not implemented
to 0x00C0; clear the THERMISTOR_HOT and ALARM_INHIBITED flip-
flops.
THERMISTOR_HOT is reset by either POR_RESET or
BATTERY_PRESENT = 0 status bit.
DESCRIPTION