APS1012SW Tripp Lite, APS1012SW Datasheet - Page 2

• Manufacturer Part Number: APS1012SW
• Description: Tripp Lite's APS1012SW 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 1000 watts of continuous 120V AC
• Manufacturer: Tripp Lite

Continuous output
capacity (watts)
Peak output capacity
(watts)
Output nominal
voltage
Output voltage
regulation
Output frequency
regulation
Overload protection
Outlet quantity / type
INPUT
Recommended
Electrical Service
Maximum input
amps / watts
Input connection
type
Voltage
compatibility (VAC)
Voltage
compatibility (VDC)
BATTERY
Expandable battery
runtime
DC system voltage
(VDC)
Battery recharge rate
LEDS ALARMS & SWITCHES
Alarms
Switches
Front panel LEDs
PHYSICAL
Cooling method
Unit Dimensions
(HWD/in)
Unit weight (lbs)
Material of
construction
Form factors
supported
ENVIRONMENTAL
1000
2000
120V
LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC): Maintains sine wave
output voltage of 120-150VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)
60 Hz (+/- 0.3 Hz)
Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Hardwire
DC INPUT: Requires 12VDC input source capable of delivering 120A for the required duration (when used at full
continuous capacity). For automotive applications, professional hardwire installation with 225A minimum battery
system fusing is recommended. A
DC INPUT: Full continuous load - 120A at 12VDC. AC INPUT: 15 amps at 120VAC with full inverter and charger load.
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire
120
12
Runtime is expandable with any number of user supplied wet or gel type batteries
12
Includes 4/40 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries.
Audible status indicators
The inverter provides a RJ-45 port for optional
interface (APSRMSW sold separately)
Set of front panel LED's display inverter status, charger status, as well as battery voltage status
Fan
16.33 x 8.85 x 7.2
35.5
Powder coated Steel
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)
APSRMSW
remote control. RJ45 port operates with standard RJ485