AN2616 Freescale Semiconductor / Motorola, AN2616 Datasheet - Page 16

• Manufacturer Part Number: AN2616
• Description: Getting Started with HCS08 and CodeWarrior Using C
• Manufacturer: Freescale Semiconductor / Motorola

AN2616
Running the code
Using monitor
16
“AN2140/D — Serial Monitor for MC9S08GB/GT” for a full description of its
capability.
The next two sub-sections discuss the use of HCS08 serial monitor mode or
BDM as the method of connecting to the target device on either the evaluation
or demo board. There are several differences in the dialog boxes and in the
progression through the target connection; these differences are detailed in the
following sections.
If you are using BDM, skip this section; go directly to
Getting Started with HCS08 and CodeWarrior Using C
1. From the target connection pull-down, ensure that “Monitor” is selected:
2. Enable monitor mode on the target. (For the demo and evaluation
3. Select Debug (
Freescale Semiconductor, Inc.
For More Information On This Product,
boards, press switch 4, whilst applying power, or whilst pressing the
reset switch on the evaluation board).
True-Time simulator and Real-Time debugger (the HCS08 debugger).
The debugger will then proceed to try to establish connection with the
target device, by trying all the baud rates:
Go to: www.freescale.com
). This compiles and links the code, and invokes the
Using BDM on page
MOTOROLA
17.