ds1818r-5t-r Maxim Integrated Products, Inc., ds1818r-5t-r Datasheet - Page 2
![no-image](/images/no-image-200.jpg)
ds1818r-5t-r
Manufacturer Part Number
ds1818r-5t-r
Description
Ds1818 3.3v Econoreset With Pushbutton
Manufacturer
Maxim Integrated Products, Inc.
Datasheet
1.DS1818R-5T-R.pdf
(5 pages)
OPERATION - POWER MONITOR
The DS1818 provides the functions of detecting out-of-tolerance power supply conditions and warning a
processor-based system of impending power failures. When V
signal is asserted. On power-up,
reached the selected tolerance. This allows the power supply and microprocessor to stabilize before
is released.
BLOCK DIAGRAM (OPEN-DRAIN OUTPUT) Figure 1
APPLICATION EXAMPLE Figure 2
OPERATION - PUSHBUTTON RESET
The DS1818 provides a pushbutton switch for manual reset control. When the DS1818 is not in a reset
cycle, a pushbutton reset can be generated by pulling the
pushbutton is held low, the
the pushbutton is released. See Figure 2 for an application example and Figure 3 for the timing diagram.
TIMING DIAGRAM: PUSHBUTTON RESET Figure 3
RST
RST
is forced active low and will remain active low for about 150 ms after
is kept active for approximately 150 ms after the power supply has
2 of 5
RST
CC
is detected as out-of-tolerance, the
pin low for at least 1 ms. When the
DS1818
RST
RST