s7030-1008 Hamamatsu Photonics, K.K.,, s7030-1008 Datasheet - Page 8

• Manufacturer Part Number: s7030-1008
• Description: Ccd Area Image Sensor
• Manufacturer: Hamamatsu Photonics, K.K.,

8
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
A chip thermistor is built in the same package with a CCD chip, and the CCD chip temperature can be monitored with it. A relation
between the thermistor resistance and absolute temperature is expressed by the following equation.
R1 = R2 × expB (1 / T1 - 1 / T2)
The characteristics of the thermistor used are as follows.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
When cooling the CCD by an externally attached cooler, set the cooler operation so that the temperature gradient (rate of tempera-
ture change) for cooling or allowing the CCD to warm back is less than 5 K/minute.
l
l
l
l
l
Supply voltage
where R1 is the resistance at absolute temperature T1 (K)
R2 is the resistance at absolute temperature T2 (K)
B is so-called the B constant (K)
R (298K) = 10 k
B (298K / 323K) = 3450 K
Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with
Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to dis-
Ground the tools used to handle these sensors, such as tweezers and soldering irons.
Element cooling/heating temperature incline rate
Specifications of built-in temperature sensor
Precaution for use (Electrostatic countermeasures)
an earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
charge.
Master clock
Master start
Features
C7040: for S7030 series
C7041: for S7031 series
Area scanning or full line-binnng operation
Readout frequency: 250 kHz
Readout noise: 20 e - rms
T=50 ˚C ( T changes by cooling method.)
Input
Symbol
V
V
V
V
V
Vp
V
ms
mc
A1+
A1-
D1
A2
D2
F
+12 Vdc, 100 mA (C7041)
HCMOS logic compatible,
HCMOS logic compatible
+5 Vdc, 30 mA (C7041)
+5 Vdc, 2.5 A (C7041)
+15 Vdc, +100 mA
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2008 Hamamatsu Photonics K.K.
-15 Vdc, -100 mA
+5 Vdc, 200 mA
+24 Vdc, 30 mA
Multichannel detector heads C7040, C7041
1 MHz
Value
CCD area image sensor
S7030/S7031 series
100 k
10 k
1 M
220
240
TEMPERATURE (K)
260
280
Cat. No. KMPD1023E14
Apr. 2008 DN
300
KMPDB0111EB