mc68hc705v12 Freescale Semiconductor, Inc, mc68hc705v12 Datasheet - Page 144

• Manufacturer Part Number: mc68hc705v12
• Description: M68hc05-based Mcu Hc05 Freescale Semiconductor
• Manufacturer: Freescale Semiconductor, Inc

Byte Data Link Controller – Digital (BDLC–D)
14.4.1.4 BDLC Wait Mode
14.4.1.5 BDLC Stop Mode
14.4.1.6 Digital Loopback Mode
Advance Information
This power-conserving mode is entered automatically from run mode
whenever the CPU executes a WAIT instruction and if the WCM bit in
the BCR1 register is cleared previously.
In this mode, the BDLC internal clocks continue to run. The first
passive-to-active transition of the bus generates a CPU interrupt request
from the BDLC, which wakes up the BDLC and the CPU. In addition, if
the BDLC receives a valid end-of-frame (EOF) symbol while operating in
wait mode, then the BDLC also will generate a CPU interrupt request,
which wakes up the BDLC and the CPU. See
This power-conserving mode is entered automatically from run mode
whenever the CPU executes a STOP instruction or if the CPU executes
a WAIT instruction and the WCM bit in the BCR1 is set previously.
In this mode, the BDLC internal clocks are stopped but the physical
interface circuitry is placed in a low-power mode and awaits network
activity. If network activity is sensed, then a CPU interrupt request will be
generated, restarting the BDLC internal clocks. See
When a bus fault has been detected, the digital loopback mode is used
to determine if the fault condition is caused by failure in the node’s
internal circuits or elsewhere in the network, including the node’s analog
physical interface. In this mode, the transmit digital output pin (BDTxD)
and the receive digital input pin (BDRxD) of the digital interface are
disconnected from the analog physical interface and tied together to
allow the digital portion of the BDLC to transmit and receive its own
messages without driving the J1850 bus.
Freescale Semiconductor, Inc.
For More Information On This Product,
Byte Data Link Controller – Digital (BDLC–D)
Go to: www.freescale.com
14.8.1 Wait
MC68HC705V12
14.8.2 Stop
Mode.
—
Rev. 3.0
Mode.