atmega165pa-mnr ATMEL Corporation, atmega165pa-mnr Datasheet - Page 7

no-image

atmega165pa-mnr

Manufacturer Part Number
atmega165pa-mnr
Description
8-bit Atmel Microcontroller With 16/32/64k Bytes In-system Programmable Flash
Manufacturer
ATMEL Corporation
Datasheet
2.3.5
2.3.6
2.3.7
2.3.8
2.3.9
8285BS–AVR–03/11
Port C (PC7:PC0)
Port D (PD7:PD0)
Port E (PE7:PE0)
Port F (PF7:PF0)
Port G (PG5:PG0)
ATmega165A/165PA/325A/325PA/3250A/3250PA/6
Port C is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The
Port C output buffers have symmetrical drive characteristics with both high sink and source
capability. As inputs, Port C pins that are externally pulled low will source current if the pull-up
resistors are activated. The Port C pins are tri-stated when a reset condition becomes active,
even if the clock is not running.
Port C also serves the functions of special features of the
ATmega165A/165PA/325A/325PA/3250A/3250PA/645A/645P/6450A/6450P as listed on
nate Functions of Port D” on page
Port D is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The
Port D output buffers have symmetrical drive characteristics with both high sink and source
capability. As inputs, Port D pins that are externally pulled low will source current if the pull-up
resistors are activated. The Port D pins are tri-stated when a reset condition becomes active,
even if the clock is not running.
Port D also serves the functions of various special features of the
ATmega165A/165PA/325A/325PA/3250A/3250PA/645A/645P/6450A/6450P as listed on
nate Functions of Port D” on page
Port E is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The
Port E output buffers have symmetrical drive characteristics with both high sink and source
capability. As inputs, Port E pins that are externally pulled low will source current if the pull-up
resistors are activated. The Port E pins are tri-stated when a reset condition becomes active,
even if the clock is not running.
Port E also serves the functions of various special features of the
ATmega165A/165PA/325A/325PA/3250A/3250PA/645A/645P/6450A/6450P as listed on
nate Functions of Port E” on page
Port F serves as the analog inputs to the A/D Converter.
Port F also serves as an 8-bit bi-directional I/O port, if the A/D Converter is not used. Port pins
can provide internal pull-up resistors (selected for each bit). The Port F output buffers have sym-
metrical drive characteristics with both high sink and source capability. As inputs, Port F pins
that are externally pulled low will source current if the pull-up resistors are activated. The Port F
pins are tri-stated when a reset condition becomes active, even if the clock is not running. If the
JTAG interface is enabled, the pull-up resistors on pins PF7(TDI), PF5(TMS), and PF4(TCK) will
be activated even if a reset occurs.
Port F also serves the functions of the JTAG interface, see
page
Port G is a 6-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The
Port G output buffers have symmetrical drive characteristics with both high sink and source
capability. As inputs, Port G pins that are externally pulled low will source current if the pull-up
resistors are activated. The Port G pins are tri-stated when a reset condition becomes active,
even if the clock is not running.
82.
79.
79.
80.
”Alternate Functions of Port F” on
”Alter-
”Alter-
”Alter-
7

Related parts for atmega165pa-mnr