mtfddaa256mag Micron Semiconductor Products, mtfddaa256mag Datasheet

no-image

mtfddaa256mag

Manufacturer Part Number
mtfddaa256mag
Description
C300 1.8-inch Sata Nand Flash Ssd
Manufacturer
Micron Semiconductor Products
Datasheet
C300 1.8-Inch SATA NAND Flash SSD
MTFDDACxxxMAG
Features
PDF: 09005aef83e18422
realssd_c300_1_8.pdf - Rev. B 4/10 EN
• Micron
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queueing support with 32 com-
• ATA-8 command set compliant
• ATA security feature command set and password
• Secure erase (data page) command set: fast and se-
• Self-monitoring, analysis, and reporting technology
• Performance
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
mand slot support
login support
cure erase (clear, sanitize)
(SMART) command set
– PCMark
– Sequential READ: up to 355 MB/s (SATA 6 Gb/s),
– Sequential WRITE: up to 215 MB/s (75 MB/s for
– Random 4k READ: up to 60,000 IOPS (SATA 6 Gb/
– Random 4k WRITE: up to 45,000 IOPS (15,000
– READ latency: 55µs (TYP SATA 6 Gb/s), 70µs
– WRITE latency: 60µs (TYP SATA 6 Gb/s), 95µs
[40,000 for 64GB] (SATA 6 Gb/s); 35,000 [32,000
for 64GB] (SATA 3Gb/s)
up to 265 MB/s (SATA 3 Gb/s)
64GB drive; 140 MB/s for 128GB drive)
s), up to 50,000 IOPS (SATA 3 Gb/s)
IOPS for 64GB drive; 30,000 IOPS for 128GB drive)
(TYP SATA 3 Gb/s)
(TYP SATA 3 Gb/s)
®
MLC NAND Flash
®
Products and specifications discussed herein are subject to change by Micron without notice.
Vantage (HDD test suite score): 45,000
1, 2
1
• Reliability
• Endurance: Total bytes written (TBW) – 72TB
• Mechanical
• Capacity
• Operating temperature: Commercial (0°C to +70°C)
Notes:
– MTBF: 1.2 million device hours
– 3-year warranty
– Static and dynamic wear leveling
– Field-upgradable firmware
– Uncorrectable bit error rate (UBER): <1 sector
– Low power consumption
– Micro SATA connector: 3.3V ±5%
– 1.8-inch drive: 78.5mm x 54mm x 5mm
– Weight: 45g (MAX)
per 10
Micron Technology, Inc. reserves the right to change products or specifications without notice.
1. Typical I/O performance numbers as meas-
2. 4K transfers used for READ/WRITE latency
3. 1GB = 1 billion bytes; formatted capacity is
15
3
(unformatted): 64GB, 128GB, 256GB
C300 1.8-Inch NAND Flash SSD
ured using Iometer with a queue depth of
32 and write cache enabled.
values.
less.
bits read
© 2009 Micron Technology, Inc. All rights reserved.
Features

Related parts for mtfddaa256mag

mtfddaa256mag Summary of contents

Page 1

C300 1.8-Inch SATA NAND Flash SSD MTFDDACxxxMAG Features • Micron ® MLC NAND Flash • RoHS-compliant package • SATA 6 Gb/s interface • ATA modes supported – PIO mode 3, 4 – Multiword DMA mode – Ultra ...

Page 2

Part Numbering Information Micron’s RealSSD™ C300 SSD is available in different configurations and densities. Visit list of valid part numbers. Figure 1: Part Number Chart Micron Technology Product Family FD = Flash drive Drive Interface D = SATA 6.0 Gb/s ...

Page 3

General Description Micron’s RealSSD™ solid state drive (SSD) uses a single-chip controller with a SATA in- terface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing ...

Page 4

Architecture The 300-series SSD is a NAND Flash storage device. A SATA 6 Gb/s interface connects to the SSD externally and communicates with the controller. The controller manages data transfers to and from the NAND Flash array. Table 1: C300 ...

Page 5

Interface Connectors The SATA signal segment interface cable has four conductors and three ground connec- tions. As shown in Package Dimensions, the cable includes a 7-pin signal segment and a 9-pin power segment arranged in a single row with a ...

Page 6

Figure 3: Micro SSD Interface Connections PDF: 09005aef83e18422 realssd_c300_1_8.pdf - Rev. B 4/10 EN C300 1.8-Inch NAND Flash SSD P1 S1 Power Signal Segment Segment 6 Micron Technology, Inc. reserves the right to change products or specifications without notice. Architecture ...

Page 7

Device ID Table 6: IDENTIFY Device ID • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the ...

Page 8

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 9

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 10

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 11

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 12

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 13

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 14

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 15

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 16

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 17

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 18

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 19

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 20

Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...

Page 21

Commands Table 7: Supported ATA Command Set See ATA-7 standard for command details Command Name CHECK POWER MODE DEVICE CONFIGURATION RESTORE DEVICE CONFIGURATION FREEZE LOCK DEVICE CONFIGURATION IDENTIFY DEVICE CONFIGURATION SET DOWNLOAD MICROCODE EXECUTE DEVICE DIAGNOSTIC FLUSH CACHE FLUSH CACHE ...

Page 22

Table 7: Supported ATA Command Set (Continued) See ATA-7 standard for command details Command Name SCT SET FEATURE CONTROL SCT RETURN FEATURE CONTROL SCT RETURN FEATURE OPTION FLAG SCT RETURN SCT DATA TABLE SECURITY DISABLE PASSWORD SECURITY ERASE PREPARE SECURITY ...

Page 23

Table 7: Supported ATA Command Set (Continued) See ATA-7 standard for command details Command Name WRITE MULTIPLE WRITE MULTIPLE EXT WRITE MULTIPLE FUA EXT WRITE SECTOR(S) (with retry) WRITE SECTOR(S) EXT WRITE UNCORRECTABLE EXT PDF: 09005aef83e18422 realssd_c300_1_8.pdf - Rev. B ...

Page 24

Reliability Micron’s SSDs incorporate advanced technology for defect and error management. They use various combinations of hardware-based error correction algorithms and firm- ware-based static and dynamic wear-leveling algorithms. Over the life of the SSD, uncorrectable errors may occur. An uncorrectable ...

Page 25

Electrical Characteristics Table 11: SATA Typical Power Consumption 3 Density Idle 64GB < 0.09 128GB < 0.09 256GB < 0.09 1. Data taken at 25°C using a 6 Gb/s SATA interface. Notes: 2. IOMETER MAX transfer rate with 128KB transfer ...

Page 26

Compliance Micron SSDs comply with the following: • RoHS “green” • CE (Europe): EN55022, 2006 Class B and EN55024, 1998 + A1: 2001 + A2:2003 • FCC: CFR Title 47, Part 15, ICES-003, all Class B • UL (US): approval ...

Page 27

Package Dimensions Figure 4: 1.8-Inch Package (Preliminary) 3.00 0.118 in (2 PLCS) 3.30 0.130 in (2 PLCS) 0.85 0.033 in (2 PLCS) DRIVE AND CONNECTOR CENTER 1. All dimensions in millimeters. Note: PDF: 09005aef83e18422 realssd_c300_1_8.pdf - Rev. B 4/10 EN ...

Page 28

References • Serial ATA: High-speed serialized AT attachment, Serial ATA working group, available at www.sata-io.org • Small Form Factor Specification SFF-8201, SFF-8223 • Electronic Industries Association Standard, EIA-720 • Serial ATA: High-speed serialized AT attachment, Serial ATA working group • ...

Related keywords