lis3dsh STMicroelectronics, lis3dsh Datasheet - Page 35

• Manufacturer Part Number: lis3dsh
• Description: Mems Digital Output Motion Sensor Ultra Low-power High Performance Three-axis “nano” Accelerometer
• Manufacturer: STMicroelectronics

LIS3DSH
8.8
Table 29.
STATUS (27h)
Status register.
Table 30.
Table 31.
BOOT
FIFO_EN
WTM_EN
ADD_INC
P1_EMPTY
P1_WTM
P1_OVERRUN FIFO overrun interrupt on int1. Default value 0.
P2_BOOT
ZYXOR
ZOR
YOR
XOR
ZYXDA
ZDA
ZYXOR
Control register 6 description
Status register
Status register description
X, Y, and Z axis data overrun. Default value: 0
0=no overrun has occurred; 1=a new set of data has overwritten the previous ones
Z axis data overrun. Default value: 0
0=no overrun has occurred; 1=a new set of data for the Z-axis has overwritten the pre-
vious one
Y axis data overrun. Default value: 0
0=no overrun has occurred;
1=a new data for the Y-axis has overwritten the previous one
X axis data overrun. Default value: 0
0=no overrun has occurred;
1=a new data for the X-axis has overwritten the previous one
X, Y, and Z axis new data available. Default value: 0
0=a new set of data is not yet available; 1=a new set of data is available
Z axis new data available. Default value: 0
0=a new data for the Z-axis is not yet available;
1=a new data for the Z-axis is available
ZOR
Force reboot, cleared as soon as the reboot is finished. Active high.
FIFO enable. Default value 0.
0=disable; 1=enable
Enable FIFO Watermark level use. Default value 0.
0=disable; 1=enable
Register address automatically incremented during a multiple byte access with a
serial interface (I
0=disable; 1=enable
Enable FIFO Empty indication on int1. Default value 0.
0=disable; 1=enable
FIFO Watermark interrupt on int1. Default value 0.
0:=disable; 1=enable
0=disable; 1=enable
BOOT interrupt on int2. Default value 0.
0=disable; 1=enable
YOR
Doc ID 022405 Rev 1
2
C or SPI).
XOR
ZYXDA
ZDA
Register description
YDA
XDA
35/53