CY7C68000-56PVCT CYPRESS [Cypress Semiconductor], CY7C68000-56PVCT Datasheet - Page 12
![no-image](/images/no-image-200.jpg)
CY7C68000-56PVCT
Manufacturer Part Number
CY7C68000-56PVCT
Description
Manufacturer
CYPRESS [Cypress Semiconductor]
Datasheet
1.CY7C68000-56PVCT.pdf
(14 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
CY7C68000-56PVCT
Manufacturer:
EPCOS
Quantity:
4 000
Document #: 38-08016 Rev. *H
12.0
The following recommendations should be followed to ensure
reliable high-performance operation.
Note:
3.
• At least a four-layer impedance controlled boards are
• Specify impedance targets (ask your board vendor what
• To control impedance, maintain trace widths and trace
• Minimize stubs to minimize reflected signals.
• Connections between the USB connector shell and signal
required to maintain signal quality.
they can achieve).
spacing to within specifications.
ground must be done near the USB connector.
Source for recommendations: EZ-USB FX2™ PCB Design Recommendations, http:///www.cypress.com/cfuploads/support/app_notes/FX2_PCB.pdf High-
Speed USB Platform Design Guidelines, http://www.usb.org/developers/docs/hs_usb_pdg_r1_0.pdf.
CORNER
PIN #1
E-PAD maximum size
4.75 X 5.46 mm [187 x 215 mils] (width x length).
PCB Layout Recommendations
A
DIMENSIONS IN MM[INCHES] MIN.
REFERENCE JEDEC MO-220
Figure 11-2. 56-lead Quad Flatpack No Lead Package (8 x 8 mm) (SAWN VERSION)
TOP VIEW
7.90[0.311]
8.10[0.319]
MAX.
56-Lead QFN 8 x 8 mm (Sawn Version) LS56B
1.00[0.039] MAX.
[3]
SIDE VIEW
C
0.08[0.003]
• Bypass/flyback capacitors on VBus, near the connector, are
• DPLUS and DMINUS trace lengths should be kept to within
• Maintain a solid ground plane under the DPLUS and
• If possible, do not place any vias on the DPLUS or DMINUS
• Isolate the DPLUS and DMINUS traces from all other signal
0.04[0.0015] MAX.
0.20[0.008] REF.
SEATING
PLANE
recommended.
2 mm of each other in length, with preferred length of 20–30
mm.
DMINUS traces. Do not allow the plane to be split under
these traces.
trace routing.
traces by no less than 10 mm.
C
0.30[0.012]
0.50[0.020]
6.45[0.254]
6.55[0.258]
(PAD SIZE VARY
BY DEVICE TYPE)
0.18[0.007]
0.28[0.011]
BOTTOM VIEW
E-PAD
0.50[0.020]
CY7C68000
51-85187-*A
Page 12 of 14
CORNER
PIN #1