MC68HC705P9CDW FREESCALE [Freescale Semiconductor, Inc], MC68HC705P9CDW Datasheet - Page 127

• Manufacturer Part Number: MC68HC705P9CDW
• Description: Microcontrollers
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

10.7.3 SIOP Data Register
MC68HC705P9 — Rev. 4.0
MOTOROLA
The SIOP data register (SDR) is both the transmit data register and the
receive data register. To read or write the SIOP data register, the SPE
bit in the SIOP control register must be set.
With the SIOP configured for master mode, writing to the SIOP data
register initiates a serial transfer. This register is not buffered. Writing to
the SIOP data register overwrites the previous contents. Reading or
writing to the SIOP data register while a transmission is in progress can
cause invalid data to be transmitted or received.
$000C
Reset:
Read:
Write:
This clearable, read-only bit is automatically set if the SIOP data
register is accessed while a data transfer is in progress. Reading or
writing the SIOP data register while a transmission is in progress
causes invalid data to be transmitted or read. Clear DCOL by reading
the SIOP status register with SPIF set and then accessing the SIOP
data register. Because the clearing sequence accesses the SIOP
data register, the sequence has to be completed before another
transmission starts or DCOL is set again.
To clear DCOL when SPIF is not set, turn off the SIOP by writing a
zero to SPE and then turn it back on by writing a one to SPE. Reset
clears DCOL.
Freescale Semiconductor, Inc.
For More Information On This Product,
1 = Invalid access of SDR
0 = Valid access of SDR
Bit 7
Bit 7
Serial Input/Output Port (SIOP)
Go to: www.freescale.com
Figure 10-8. SIOP Data Register (SDR)
6
6
5
5
Unaffected by reset
4
4
3
3
Serial Input/Output Port (SIOP)
2
2
1
1
Technical Data
I/O Registers
Bit 0
Bit 0
127