HD6433045 HITACHI [Hitachi Semiconductor], HD6433045 Datasheet - Page 222

• Manufacturer Part Number: HD6433045
• Description: Hitachi Single-Chip Microcomputer
• Manufacturer: HITACHI [Hitachi Semiconductor]

The transfer count is specified as a 16-bit value in ETCR. The ETCR value is decremented by 1 at
each transfer. When the ETCR value reaches H'0000, the DTE bit is cleared and the transfer ends.
If the DTIE bit is set to 1, a CPU interrupt is requested at this time. The maximum transfer count
is 65,536, obtained by setting ETCR to H'0000.
Transfers can be requested (activated) by compare match/input capture A interrupts from ITU
channels 0 to 3, transmit-data-empty and receive-data-full interrupts from SCI channel 0, and
external request signals.
For the detailed settings see section 8.2.4, Data Transfer Control Registers (DTCR).
Legend
L = initial setting of MAR
N = initial setting of ETCR
Address T = L
Address B = L + (–1)
Address T
Address B
DTID
• (2
DTSZ
Figure 8-2 Operation in I/O Mode
• N – 1)
1 byte or word is
transferred per request
Transfer
208
IOAR