TNY263_04 POWERINT [Power Integrations, Inc.], TNY263_04 Datasheet - Page 16

• Manufacturer Part Number: TNY263_04
• Description: Enhanced, Energy Efficient, Low Power Off-line Switcher
• Manufacturer: POWERINT [Power Integrations, Inc.]

NOTES:
A. Total current consumption is the sum of I
B Since the output MOSFET is switching, it is difficult to isolate the switching current from the supply current at the
C. BYPASS pin is not intended for sourcing supply current to external circuitry.
D. See typical performance characteristics section for BYPASS pin start-up charging waveform.
E. For current limit at other di/dt values, refer to Figure 25.
F. This parameter is derived from characterization.
G. This parameter is derived from the change in current limit measured at 1X and 4X of the di/dt shown in the I
H. Auto-restart on time has the same temperature characteristics as the oscillator (inversely proportional to
16
TNY263-268
and the sum of I
DRAIN. An alternative is to measure the BYPASS pin current at 6.1 V.
specification.
frequency).
E
4/04
S2
and I
DSS
when EN/UV pin is open (MOSFET switching).
S1
and I
DSS
when EN/UV pin is shorted to ground (MOSFET not switching)
LIMIT