1778410M2FCB0 Vishay, 1778410M2FCB0 Datasheet
1778410M2FCB0
Related parts for 1778410M2FCB0
1778410M2FCB0 Summary of contents
Page 1
... P 10 Dimensions in mm (1) ⎪F - F’⎪ < 0 7.5 + 0.6/- 0.1 mm APPLICATIONS For standard across the line X2 applications. See also application note: www.vishay.com/doc?28153 REFERENCE STANDARDS “IEC 60384-14 ed-3 and EN 60384-14” “IEC 60065, pass. flamm. class B” CSA-C22.2 No. 1; UL1414 CSA-E384-14; UL1283; CQC MARKING C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation ...
Page 2
... K = ± e.g ± 0.01 µF = 310 0.1 µF = 410 Specials: 1.0 µF = 510 %/- %/+ %/- %/- %/+ 20 % Note (1) For detailed tape specification refer to Packaging Information: www.vishay.com/doc?28139 www.vishay.com 2 Interference Suppression Film Capacitors MKP Radial Potted Type CAPACITANCE TOLERANCE VOLTAGES ...
Page 3
... For technical questions, contact: RFI@vishay.com F1778-2 X2 Vishay Roederstein VALUE 310 V 630 kHz ≤ ≤ 600 V/µs 600 V/µs 400 V/µs 150 V/µs 100 V/µ ...
Page 4
... For technical questions, contact: RFI@vishay.com (2) Ordering Code C-Value Tolerance Voltage Pitch 210 . 2 D 212 215 . 2 D 218 222 ...
Page 5
... For technical questions, contact: RFI@vishay.com F1778-2 X2 Vishay Roederstein (2) Ordering Code Lead Tolerance Voltage Pitch Length Design ( ...
Page 6
... The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed-circuit board: • ...
Page 7
... Max. RMS current as a function of frequency (typical curve (Hz For technical questions, contact: RFI@vishay.com F1778-2 X2 Vishay Roederstein (Hz 100 1000 10 000 C (nF) 4700 nF 1000 nF 470 nF 100 4 ≤ ...
Page 8
... For X2 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum mains voltage of 310 Vac. • For series impedance applications we refer to application note www.vishay.com/doc?28153 • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • ...
Page 9
... Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B Temperature: 110 °C Duration Temperature °C For technical questions, contact: RFI@vishay.com F1778-2 X2 Vishay Roederstein PERFORMANCE REQUIREMENTS No visible damage Legible marking ¦ΔC/C¦ ≤ the value measured initially. ...
Page 10
... Tangent of loss angle Voltage proof 1350 Vdc; 1 min between terminations 2120 Vac; 1 min between terminations and case Insulation resistance For technical questions, contact: RFI@vishay.com PERFORMANCE REQUIREMENTS No visible damage Legible marking ¦ΔC/C¦ ≤ the value measured in 4.11.1. Increase of tan δ: ≤ ...
Page 11
... V > 1750 One flame application 45.0° 20 cycles of 2.5 kV discharges on the test capacitor connected to U Rac For technical questions, contact: RFI@vishay.com F1778-2 X2 Vishay Roederstein PERFORMANCE REQUIREMENTS ¦ΔC/C¦ ≤ compared to values measured in 4.15.1. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ ...
Page 12
... Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’ ...