VS-709-ECE-KAAN-R5/V8 Vectron, VS-709-ECE-KAAN-R5/V8 Datasheet - Page 3

• Manufacturer Part Number: VS-709-ECE-KAAN-R5/V8
• Description: VCSO Oscillators 672.16MHz to 696.61M 3.3Volt -40 to 85C
• Manufacturer: Vectron
• Series: VS709r

Specifications of VS-709-ECE-KAAN-R5/V8

• Rohs: yes
• Package / Case: 7 mm x 5 mm x 1.8 mm
• Frequency: 672.162712 MHz, 696.6149 MHz
• Termination Style: SMD/SMT
• Supply Voltage: 3.3 V
• Output Format: LVPECL
• Dimensions: 5 mm W x 7 mm L x 1.8 mm H
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Product: VCSO

Page3 of 9
VS-709 Dual Frequency VCSO
Stresses in excess of the absolute maximum ratings can permanently damage the device. Also, exposure to these absolute
maximum ratings for extended periods may adversely aff ect device reliability. Functional operation is not implied at these or any
other conditions in excess of those represented in the operational sections of this datasheet. Permanent damage is also possible if
any device input (Vc or OS) draws >100 mA.
the pull down resistor values shown provide reasonable power con-
sumption and waveform performance.
fi guration. Pull down resistors are used for LV-PECL outputs and are
removed for LVDS outputs. Since the LVDS outputs are AC coupled,
the output DC levels cannots be measured.
LV-PECL to LV-PECL: For short transmission lengths,
Functional Test: Allows use of standard power supply biasing con-
Soldering Temperature / Duration
Voltage Control Range
Storage Temperature
Output Current
Power Supply
Output Select
Input Current
Parameter
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Test Circuits & Output Load Confi guration
Absolute Maximum Ratings
Symbol
OSelect
T
PEAK
T
V
I
OUT
V
I
STR
IN
CC
C
/ t
P
devices confi gured for 3.3V operation. LV-PECL outputs are DC
coupled to 50Ω test equipment. LVDS outputs are connected to a
digital volt meter, then AC coupled to the test equipment. The digital
volt meter allows for Mid Level & Swing measurements.
provided internally within the LVDS receiver.
Production Test: DC levels shown for VEE, OSelect, & Vc are for
LVDS to LVDS: The 100Ω resistor should be removed if this load is
-55 to 125
Ratings
260 / 40
0 to V
0 to V
0 to 6
100
25
CC
CC
°C / sec
Unit
mA
mA
°C
V
V
V
Rev: 06Aug2011