WIZ610wi WIZnet, WIZ610wi Datasheet - Page 15

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

2.2. Configuration
2.2.1 Wizard Program
Execute Wizard Program. You can download the Wizard Program from WIZnet webstie.
Figure 2. WIZ610wi Wizard Program
ⓐ: If you click ⓒSearch button, details about WIZ610wi on the same network will be
displayed. You can check IP address, Subnet Mask, Gateway, DHCP, MAC Address, Standard
Type (802.11b or g) and SSID.
ⓑ IP Info: If you select a WIZ610wi, the IP address information is displayed.
ⓓ You can check or modify the IP address, Subnet Mask and Gateway of a WIZ610wi
module.
ⓔ MAC Addr: It displays the MAC Address of a WIZ610wi.
ⓕ Enable DHCP: You can enable or disable DHCP Server function.
After configuring ⓓ and ⓕ, click Set button for completing the configuration.
ⓖ Local System: It displays IP and MAC addresses of the PC where Wizard Program is
installed.
ⓗ Refresh: After changing IP address of the PC, click Refresh button to display the updated
information.
ⓘ DOS: It opens Command Prompt window.
ⓙ Ping: It sends Ping command to the selected WIZ610wi.
ⓚ Telnet: If you click Telnet Button, the window for telnet connection is shown. The default
7