WIZ610wi WIZnet, WIZ610wi Datasheet - Page 39

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

You can control serial devices through the serial port of WIZ610wi by using AUX port,
while you can keep serial to WiFi data communication port.
Server IP : Input server IP or input Domain Name. If both input, priority is IP address.
Server Port : Input server port.
-Reconnect Interval: Set the interval retrying connecting to server.
Baudrate: Configure serial communication speed.
Databits: Configure databits.
Parity: Configure parity checking option. (option: None, Odd, Even)
Stopbits: Configure stop bit option.(Option: 1, 2)
FlowControl: Configure flow control option. (option: none, Xon/Xoff, RTS/CTS)
Aux Port Configuration
Mixed mode
In this mode, WIZ610wi normally operates as a TCP Server and waits for a
connection request from a client. However, if WIZ610wi receives data from the serial
device before connection is established, WIZ610wi changes to the client mode and
sends the data to the server. Therefore, in the mixed mode, the server mode has
higher priority than the client mode. Mixed mode takes advantages of both client
and server mode. The client mode may be used for sending out emergency reports
in an urgent situation while the server mode may be used for remote management.
31