WIZ610wi WIZnet, WIZ610wi Datasheet - Page 40

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

- Time: This field specifies the waiting time. When there is no more input from the serial
- Size: This field specifies the size limit in the serial buffer. Once the serial buffer reaches this
You can specify how the serial data can be packed to be sent to the Ethernet. There are
3 delimiters -
time, size and character. If all of them are set as ‘0’, whenever the serial data is arrived,
they are sent to the Ethernet immediately.
Data Packing Condition :
(‘0’: Function Disable)
port, the module will wait for the specified time and then send out the serial data to
the network. For example, if 2000 ms is specified, the module will send out the packet
at 2000 ms after the last input from the serial port. If there is no data in the serial
buffer, the module will not send out any data packets.
limit, the data will be sent out to the Ethernet. If the serial buffer is greater than the
size limit, the module will create an Ethernet packet and store the extra data, and
send out to the Ethernet when the limit is reached again.
(‘0’: Function Disable)
-
-
-
-
-
Status: You can enable Aux Port.
Protocol : Aux port can use only UDP protocol.
Mode : You can select server or client mode.
Server IP : If you select the client mode, Server IP is enabled.
Server Port: Input the port number of the server.
32