WIZ610wi WIZnet, WIZ610wi Datasheet - Page 49

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

4. Demonstration and Test
In this chapter, an example is provided for you to test the functionality of WIZ610wi. The
testing environments are the followings:
STEP1.
① Connect the PC and WIZ610wi base board by using a serial cable.
② Connect the PC and WIZ610wi base board by using an Ethernet cable.
③ Turn on the power switch of WIZ610WI base board.
STEP2.
① On your PC, go to the “Network Setting” and connect to your WIZ610wi in the
② In your web browser, input IP address of WIZ610wi (Default : 192.168.1.254). If
STEP3.
①
②
<Hardware>
<Software>
“Wireless Network Connection”.
configuration page appears, click “Serial setup” menu and set the serial parameters.
Execute terminal program at the PC. (Ex: Hyper Terminal)
Set the baud rate as the same value of WIZ610wi.
(WIZ610wi Environment Setup)
(Data Transmission)
WIZ610WI module and WIZ610WI base board
Connect PC and module’s Ethernet port by using an Ethernet Cable(Direct or
Crossover)
Connect PC and module’s serial port by using a serial cable
Hyper Terminal (or any other terminal program)
A PC equipped with a RS-232 serial port
41