conga-MCB/Qseven congatec, conga-MCB/Qseven Datasheet - Page 22

• Manufacturer Part Number: conga-MCB/Qseven
• Description: Development Boards & Kits - x86 MINI-CARRIER BOARD FOR QSEVEN
• Manufacturer: congatec

Specifications of conga-MCB/Qseven

• Rohs: yes
• Product: Qseven Mini Carrier Boards
• Form Factor: Qseven
• Tool Is For Evaluation Of: Qseven Modules
• Core: Intel Atom
• Interface Type: CAN, Ethernet, I2C, PCI, SATA, USB
• Operating Supply Voltage: 9 V to 20 V
• Description/function: conga-MCB Qseven is a full featured, miniaturized carrier board for Qseven modules
• Dimensions: 140 mm x 95 mm
• Maximum Operating Temperature: + 60 C
• Minimum Operating Temperature: 0 C
• Part # Aliases: 20730
• For Use With: Qseven Modules

4.13
Copyright © 2012 congatec AG
Connector X15 Backlight
Connector X15 on the conga-MCB/Qseven is a 4pin box header designated for backlight voltage. Supply voltage for the backlight converter
can be set to mini carrier input power supply voltage (VCC) or +5V using jumper X32. When the VCC is used as backlight voltage, a suitable
backlight converter must be used. Maximal output current is 1A.
* VCC is the input power supply voltage of conga-MCB/Qseven.
*BCKL_CTRL signal is controlled by the I²C bus and originates from the Qseven
Jumper X32 provides the ability to select the backlight supply voltage for pin 1 of connector X15.
* VCC is the input power supply voltage of conga-MCB/Qseven. If a 12V backlight inverter is to be used 12V VCC has to be present and jumper
X32 set to position 1-2. BCKL_CTRL signal is controlled by the I
X15: 2.00mm Pitch Housing connector 4 Pos. (female) JST P/N: PHR-4.
X32: 2.54mm grid jumper
See section 6 of this document for information about this cable.
Note
Note
Connector Type
Pin
1
2
3
4
Jumper X32 Configuration
1-2
2-3
Signal
VDD BCKL (VCC*/+5V)
GND
BCKL EN (High active)
BCKL CTRL*
VCC*
+5V (default)
Jumper X32
Backlight Power
2
1
3
(X15)
1
2
2
C bus and originates from Qseven
3
QMCBm10
4
®
module.
®
module.
22/34